14NiCrMo13-4 vs S355J2W: 48% composition overlap. Significantly different materials serving different application areas.
14NiCrMo13-4 vs S355J2W
Side-by-side chemical composition and mechanical property comparison.
Overview
14NiCrMo13-4
1.6657
High-nickel case-hardening steel for heavily loaded large gears, shafts, and drivetrain components. Excellent core toughness with case hardness up to 62 HRC after carburizing. The high nickel content (3.0–3.5%) provides superior impact resistance even at low temperatures. Standard material for wind turbine gearboxes, heavy-duty industrial gears, and aerospace transmissions. Also known as EN36C (BS) and similar to SAE 9310.
S355J2W
1.8965
The most widely used structural weathering steel with minimum yield strength 355 MPa and impact testing at -20°C (J2 designation). Forms a protective patina of stable rust that eliminates the need for painting. Cu, Cr, and P additions provide atmospheric corrosion resistance up to 8 times that of plain carbon steel. Used for unpainted bridges, outdoor sculptures, railway wagons, architectural facades, transmission towers, and containers. Equivalent to ASTM A588 / Corten B.
| 14NiCrMo13-4 | S355J2W | |
|---|---|---|
| Material Number | 1.6657 | 1.8965 |
| Category | Alloy Steel | Alloy Steel |
| Standard | EN 10084 | EN 10025-5 |
Chemical composition (wt%)
| Element | 14NiCrMo13-4 | S355J2W | Overlap |
|---|---|---|---|
| C | 0.11–0.17% | ≤ 0.16% | Partial |
| Si | ≤ 0.4% | ≤ 0.5% | OK |
| Mn | 0.3–0.6% | 0.5–1.5% | Partial |
| P | ≤ 0.025% | ≤ 0.03% | OK |
Mechanical properties
| Property | 14NiCrMo13-4 | S355J2W | Unit |
|---|---|---|---|
| tensile_strength | 1100–1400 | 470–630 | MPa |
| yield_strength | ≥ 850 | ≥ 355 | MPa |
| elongation | ≥ 9 | ≥ 20 | % |
Compatibility Assessment
14NiCrMo13-4 and S355J2W have significantly different compositions (48% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 14NiCrMo13-4 the same as S355J2W?
14NiCrMo13-4 and S355J2W have a 48% composition overlap. They are generally not directly interchangeable.
Can I replace 14NiCrMo13-4 with S355J2W?
Generally not recommended. The compositions differ significantly (48% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 14NiCrMo13-4 and S355J2W?
The main differences are in the following elements: C, Mn, Cr. 14NiCrMo13-4 is a Alloy Steel grade, while S355J2W is a Alloy Steel grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.