15-5PH / X5CrNiCuNb15-5 vs X5CrNiMo17-12-2: 50% composition overlap. Moderate differences, generally not direct substitutes.
15-5PH / X5CrNiCuNb15-5 vs X5CrNiMo17-12-2
Side-by-side chemical composition and mechanical property comparison.
Overview
15-5PH / X5CrNiCuNb15-5
1.4545
Martensitic precipitation-hardening stainless steel. Similar to 17-4PH but with better transverse ductility and toughness due to lower delta ferrite. Used for aerospace structural components, nuclear reactor parts, food processing equipment, and high-performance fasteners.
X5CrNiMo17-12-2
1.4401
Standard molybdenum-bearing austenitic stainless steel, known as AISI 316. Similar to 1.4404 (316L) but with higher carbon content (max 0.07%) providing slightly better high-temperature strength. Not resistant to intergranular corrosion after welding — for welded constructions prefer 1.4404 (316L). Used in chemical processing, marine environments, and applications requiring improved pitting resistance over 1.4301 (304).
| 15-5PH / X5CrNiCuNb15-5 | X5CrNiMo17-12-2 | |
|---|---|---|
| Material Number | 1.4545 | 1.4401 |
| Category | Stainless Steel | Stainless Steel |
| Standard | AMS 5659 | EN 10088-3 |
Chemical composition (wt%)
| Element | 15-5PH / X5CrNiCuNb15-5 | X5CrNiMo17-12-2 | Overlap |
|---|---|---|---|
| C | 0–0.07% | ≤ 0.07% | OK |
| Si | 0–1% | ≤ 1% | OK |
| Mn | 0–1% | ≤ 2% | OK |
| P | 0–0.03% | — | — |
Mechanical properties
| Property | 15-5PH / X5CrNiCuNb15-5 | X5CrNiMo17-12-2 | Unit |
|---|---|---|---|
| tensile_strength | ≥ 1310 | — | MPa |
| yield_strength | ≥ 1170 | — | MPa |
| elongation | ≥ 10 | — | % |
Compatibility Assessment
15-5PH / X5CrNiCuNb15-5 and X5CrNiMo17-12-2 have moderate differences (50% overlap). They are generally not direct substitutes. Consider the specific requirements of your application.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 15-5PH / X5CrNiCuNb15-5 the same as X5CrNiMo17-12-2?
15-5PH / X5CrNiCuNb15-5 and X5CrNiMo17-12-2 have a 50% composition overlap. They are generally not directly interchangeable.
Can I replace 15-5PH / X5CrNiCuNb15-5 with X5CrNiMo17-12-2?
Generally not recommended. The compositions differ significantly (50% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 15-5PH / X5CrNiCuNb15-5 and X5CrNiMo17-12-2?
The main differences are in the following elements: Cr, Ni. 15-5PH / X5CrNiCuNb15-5 is a Stainless Steel grade, while X5CrNiMo17-12-2 is a Stainless Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.