18CrNiMo7-6 vs 42MnV7: 35% composition overlap. Significantly different materials serving different application areas.
18CrNiMo7-6 vs 42MnV7
Side-by-side chemical composition and mechanical property comparison.
Overview
18CrNiMo7-6
1.6587
Premium Cr-Ni-Mo case-hardening steel for the most demanding gear applications. Excellent core toughness and hardenability for large cross-sections. The standard gear steel for wind turbines, heavy-duty gearboxes, and aerospace gearing.
42MnV7
1.5223
Vanadium-microalloyed medium-carbon steel for controlled-cooling after forging — achieves target properties without separate Q&T heat treatment ("as-forged" concept). V precipitates (VN, VC) give precipitation strengthening during air cooling. THE modern automotive crankshaft steel — replaces 42CrMo4 Q&T at lower total cost (no heat treatment furnace needed). Also used for connecting rods and large forged parts.
| 18CrNiMo7-6 | 42MnV7 | |
|---|---|---|
| Material Number | 1.6587 | 1.5223 |
| Category | Alloy Steel | Alloy Steel |
| Standard | EN 10084 | EN 10267 |
Chemical composition (wt%)
| Element | 18CrNiMo7-6 | 42MnV7 | Overlap |
|---|---|---|---|
| C | 0.15–0.21% | 0.39–0.46% | No overlap |
| Si | 0–0.4% | 0.15–0.5% | Partial |
| Mn | 0.5–0.9% | 1.5–1.8% | No overlap |
| P | 0–0.025% | 0–0.025% | OK |
Mechanical properties
| Property | 18CrNiMo7-6 | 42MnV7 | Unit |
|---|---|---|---|
| hardness_hrc | 58–62 | — | HRC |
| tensile_strength | 1050–1350 | 850–1050 | MPa |
| hardness_hb | ≤ 229 | — | HB |
Compatibility Assessment
18CrNiMo7-6 and 42MnV7 have significantly different compositions (35% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 18CrNiMo7-6 the same as 42MnV7?
18CrNiMo7-6 and 42MnV7 have a 35% composition overlap. They are generally not directly interchangeable.
Can I replace 18CrNiMo7-6 with 42MnV7?
Generally not recommended. The compositions differ significantly (35% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 18CrNiMo7-6 and 42MnV7?
The main differences are in the following elements: C, Si, Mn, S. 18CrNiMo7-6 is a Alloy Steel grade, while 42MnV7 is a Alloy Steel grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.