20MnCr5 vs 23MnB4: 64% composition overlap. Moderate differences, generally not direct substitutes.
20MnCr5 vs 23MnB4
Side-by-side chemical composition and mechanical property comparison.
Overview
20MnCr5
1.7147
Manganese-chromium case-hardening steel with higher core strength than 16MnCr5. Used for heavily loaded gears, shafts, camshafts, and transmission components requiring high surface hardness with tough core. Popular in automotive and heavy machinery.
23MnB4
1.5535
Cold-heading boron steel — optimized for cold forming of high-strength fasteners. Boron gives hardenability equivalent to much more expensive Cr-Mo alloys. Supplied spheroidized for cold heading, then quenched+tempered after forming. Property class 10.9 bolts are commonly made from this grade. Used for high-strength bolts (M8-M24), screws, studs, and threaded fasteners for automotive and construction.
| 20MnCr5 | 23MnB4 | |
|---|---|---|
| Material Number | 1.7147 | 1.5535 |
| Category | Alloy Steel | Alloy Steel |
| Standard | EN 10084 | EN 10263-4 |
Chemical composition (wt%)
| Element | 20MnCr5 | 23MnB4 | Overlap |
|---|---|---|---|
| C | 0.17–0.22% | 0.2–0.27% | Partial |
| Si | 0–0.4% | 0–0.4% | OK |
| Mn | 1.1–1.4% | 0.8–1.1% | Partial |
| P | 0–0.025% | 0–0.025% | OK |
Mechanical properties
| Property | 20MnCr5 | 23MnB4 | Unit |
|---|---|---|---|
| hardness_hrc | 58–62 | — | HRC |
| tensile_strength | 900–1200 | 830–1040 | MPa |
| hardness_hb | ≤ 217 | — | HB |
Compatibility Assessment
20MnCr5 and 23MnB4 have moderate differences (64% overlap). They are generally not direct substitutes. Consider the specific requirements of your application.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 20MnCr5 the same as 23MnB4?
20MnCr5 and 23MnB4 have a 64% composition overlap. They are generally not directly interchangeable.
Can I replace 20MnCr5 with 23MnB4?
Generally not recommended. The compositions differ significantly (64% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 20MnCr5 and 23MnB4?
The main differences are in the following elements: C, Mn. 20MnCr5 is a Alloy Steel grade, while 23MnB4 is a Alloy Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.