22MnB5 vs 36MnB4: 49% composition overlap. Significantly different materials serving different application areas.
22MnB5 vs 36MnB4
Side-by-side chemical composition and mechanical property comparison.
Overview
22MnB5
1.5528
THE press hardening (hot stamping) boron steel — used in virtually every modern car for B-pillars, bumper beams, and side impact reinforcements. As-delivered: ferritic-pearlitic, UTS 450-750 MPa, formable. After hot stamping + die quenching: fully martensitic, UTS 1300-1650 MPa. Boron (0.002-0.005%) provides critical hardenability at low cost. Usually AlSi or Zn coated to prevent oxidation during austenitizing at 880-950°C.
36MnB4
1.5511
Boron-alloyed cold heading steel — Mn 0.8-1.1%, B 0.0008-0.005%. Designed for cold-forged, then quenched & tempered high-strength fasteners (class 10.9). Good cold formability before heat treatment. Used for bolts, screws, studs, and rivets produced by cold heading followed by Q&T. Lower cost than CrMo grades for fastener applications.
| 22MnB5 | 36MnB4 | |
|---|---|---|
| Material Number | 1.5528 | 1.5511 |
| Category | Alloy Steel | Alloy Steel |
| Standard | EN 10083-3 | EN 10263-4 |
Chemical composition (wt%) — Pro
| Element | 22MnB5 | 36MnB4 | Overlap |
|---|---|---|---|
| C | 0.2–0.25% | 0.32–0.4% | No overlap |
| Si | 0–0.4% | 0–0.3% | OK |
| Mn | 1.1–1.4% | 0.8–1.1% | Partial |
| P | 0–0.025% | 0–0.025% | OK |
| S | |||
| Cr | |||
| Al | |||
| Ti | |||
| B |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeMechanical properties — Pro
| Property | 22MnB5 | 36MnB4 | Unit |
|---|---|---|---|
| Tensile Strength | 450–750 | 900–1100 | MPa |
| Yield Strength | 300–600 | 700–900 | MPa |
| Elongation | 12–18 | 9–13 | % |
| Density | |||
| Hardness HRC | |||
| Elastic Modulus |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeCompatibility Assessment
22MnB5 and 36MnB4 have significantly different compositions (49% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 22MnB5 the same as 36MnB4?
22MnB5 and 36MnB4 have a 49% composition overlap. They are generally not directly interchangeable.
Can I replace 22MnB5 with 36MnB4?
Generally not recommended. The compositions differ significantly (49% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 22MnB5 and 36MnB4?
The main differences are in the following elements: C, Mn. 22MnB5 is a Alloy Steel grade, while 36MnB4 is a Alloy Steel grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.