301 vs X2CrNiMo18-14-3: 43% composition overlap. Significantly different materials serving different application areas.
301 vs X2CrNiMo18-14-3
Side-by-side chemical composition and mechanical property comparison.
Overview
301
1.4310
Austenitic stainless steel with the highest work-hardening rate of all 300-series grades. Lower Cr and Ni (17/7 vs 18/9 for 304) makes it metastable — cold working induces martensite transformation for extreme strength (UTS >1300 MPa in full-hard temper). THE stainless spring steel. Used for stainless springs, washers, clips, structural components requiring high strength + corrosion resistance, and railway car bodies.
X2CrNiMo18-14-3
1.4435
Higher-alloy variant of 316L — Ni 12.5-15.0% (vs 10.0-13.0 for 1.4404) and Mo 2.5-3.0%. Guaranteed delta-ferrite free (essential for pharmaceutical/biotech electropolished surfaces). THE pharma and biotech process equipment stainless. Also used for chemical plant and food processing where maximum pitting resistance in the 316-family is needed.
| 301 | X2CrNiMo18-14-3 | |
|---|---|---|
| Material Number | 1.4310 | 1.4435 |
| Category | Stainless Steel | Stainless Steel |
| Standard | EN 10088-2 | EN 10088-3 |
Chemical composition (wt%)
| Element | 301 | X2CrNiMo18-14-3 | Overlap |
|---|---|---|---|
| C | 0.05–0.15% | 0–0.03% | No overlap |
| Si | 0–2% | 0–1% | OK |
| Mn | 0–2% | 0–2% | OK |
| P | 0–0.045% | — | — |
Mechanical properties
| Property | 301 | X2CrNiMo18-14-3 | Unit |
|---|---|---|---|
| tensile_strength | 520–720 | 490–690 | MPa |
| yield_strength | ≥ 205 | ≥ 190 | MPa |
| elongation | ≥ 45 | ≥ 40 | % |
Compatibility Assessment
301 and X2CrNiMo18-14-3 have significantly different compositions (43% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 301 the same as X2CrNiMo18-14-3?
301 and X2CrNiMo18-14-3 have a 43% composition overlap. They are generally not directly interchangeable.
Can I replace 301 with X2CrNiMo18-14-3?
Generally not recommended. The compositions differ significantly (43% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 301 and X2CrNiMo18-14-3?
The main differences are in the following elements: C, Ni. 301 is a Stainless Steel grade, while X2CrNiMo18-14-3 is a Stainless Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.