301 vs X5CrNi18-10: 67% composition overlap. Moderate differences, generally not direct substitutes.
301 vs X5CrNi18-10
Side-by-side chemical composition and mechanical property comparison.
Overview
301
1.4310
Austenitic stainless steel with the highest work-hardening rate of all 300-series grades. Lower Cr and Ni (17/7 vs 18/9 for 304) makes it metastable — cold working induces martensite transformation for extreme strength (UTS >1300 MPa in full-hard temper). THE stainless spring steel. Used for stainless springs, washers, clips, structural components requiring high strength + corrosion resistance, and railway car bodies.
X5CrNi18-10
1.4301
THE most widely used stainless steel worldwide — the original "18/8" austenitic (V2A). Good corrosion resistance in natural environments (water, humidity, weak acids). Non-magnetic when annealed. NOT resistant to intergranular corrosion after welding — use 1.4307 (304L) or 1.4541 (321) for welded service. PREN 17.5-21.1 — not suitable for chloride/seawater. Used everywhere: kitchen equipment, food processing, architecture, chemical tanks, automotive, medical devices.
| 301 | X5CrNi18-10 | |
|---|---|---|
| Material Number | 1.4310 | 1.4301 |
| Category | Stainless Steel | Stainless Steel |
| Standard | EN 10088-2 | EN 10088-3 |
Chemical composition (wt%)
| Element | 301 | X5CrNi18-10 | Overlap |
|---|---|---|---|
| C | 0.05–0.15% | 0–0.07% | Partial |
| Si | 0–2% | 0–1% | OK |
| Mn | 0–2% | 0–2% | OK |
| P | 0–0.045% | 0–0.045% | OK |
Mechanical properties
| Property | 301 | X5CrNi18-10 | Unit |
|---|---|---|---|
| tensile_strength | 520–720 | 500–700 | MPa |
| yield_strength | ≥ 205 | ≥ 190 | MPa |
| elongation | ≥ 45 | ≥ 45 | % |
Compatibility Assessment
301 and X5CrNi18-10 have moderate differences (67% overlap). They are generally not direct substitutes. Consider the specific requirements of your application.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 301 the same as X5CrNi18-10?
301 and X5CrNi18-10 have a 67% composition overlap. They are generally not directly interchangeable.
Can I replace 301 with X5CrNi18-10?
Generally not recommended. The compositions differ significantly (67% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 301 and X5CrNi18-10?
The main differences are in the following elements: C, Cr, Ni. 301 is a Stainless Steel grade, while X5CrNi18-10 is a Stainless Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.