303 vs X50CrMoV15: 40% composition overlap. Significantly different materials serving different application areas.
303 vs X50CrMoV15
Side-by-side chemical composition and mechanical property comparison.
Overview
303
1.4305
Free-machining austenitic stainless steel — the most machinable of all austenitic grades. 0.15-0.35% S (as MnS inclusions) provides excellent chip-breaking. Trade-off: lower corrosion resistance than 304, poor weldability (hot cracking risk), and not suitable for cold forming. Used for high-volume automatic lathe parts: fittings, valves, screws, shafts, and precision components.
X50CrMoV15
1.4116
Premium martensitic stainless steel with 0.50% C, 15% Cr, Mo and V additions. The signature blade steel of German knife manufacturers (Wüsthof, Zwilling J.A. Henckels, Victorinox Swiss Army). Mo and V improve corrosion resistance, hardenability, and toughness beyond basic Cr13 grades. Achieves 55-57 HRC. Excellent rust resistance, easy sharpening, and good edge retention. Also known as Krupp 4116. Equivalent to 5Cr15MoV (Chinese).
| 303 | X50CrMoV15 | |
|---|---|---|
| Material Number | 1.4305 | 1.4116 |
| Category | Stainless Steel | Stainless Steel |
| Standard | EN 10088-3 | EN 10088-2 |
Chemical composition (wt%)
| Element | 303 | X50CrMoV15 | Overlap |
|---|---|---|---|
| C | 0–0.1% | 0.45–0.55% | No overlap |
| Si | 0–1% | ≤ 1% | OK |
| Mn | 0–2% | ≤ 1% | OK |
| P | 0–0.045% | ≤ 0.04% | OK |
Mechanical properties
| Property | 303 | X50CrMoV15 | Unit |
|---|---|---|---|
| tensile_strength | 500–750 | ≥ 900 | MPa |
| yield_strength | ≥ 190 | ≥ 700 | MPa |
| elongation | ≥ 35 | ≥ 8 | % |
Compatibility Assessment
303 and X50CrMoV15 have significantly different compositions (40% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 303 the same as X50CrMoV15?
303 and X50CrMoV15 have a 40% composition overlap. They are generally not directly interchangeable.
Can I replace 303 with X50CrMoV15?
Generally not recommended. The compositions differ significantly (40% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 303 and X50CrMoV15?
The main differences are in the following elements: C, S, Cr. 303 is a Stainless Steel grade, while X50CrMoV15 is a Stainless Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.