304 Stainless Steel vs 440C / X105CrMo17: 52% composition overlap. Moderate differences, generally not direct substitutes.
304 Stainless Steel vs 440C / X105CrMo17
Side-by-side chemical composition and mechanical property comparison.
Overview
304 Stainless Steel
1.4301
The most widely used austenitic stainless steel. Excellent corrosion resistance, good formability and weldability. Standard choice for food processing, chemical, and architectural applications.
440C / X105CrMo17
1.4125
Highest-hardness standard martensitic stainless steel. Achieves 57-60 HRC — the hardest commonly available stainless grade. Excellent wear resistance from chromium carbides. Used for bearings, races, valve components, surgical instruments, high-end cutlery, and precision molds.
| 304 Stainless Steel | 440C / X105CrMo17 | |
|---|---|---|
| Material Number | 1.4301 | 1.4125 |
| Category | Stainless Steel | Stainless Steel |
| Standard | EN 10088-2 | EN 10088-3 |
Chemical composition (wt%)
| Element | 304 Stainless Steel | 440C / X105CrMo17 | Overlap |
|---|---|---|---|
| C | 0–0.07% | 0.95–1.2% | No overlap |
| Si | 0–1% | 0–1% | OK |
| Mn | 0–2% | 0–1% | OK |
| P | 0–0.045% | 0–0.04% | OK |
Mechanical properties
| Property | 304 Stainless Steel | 440C / X105CrMo17 | Unit |
|---|---|---|---|
| tensile_strength | 520–720 | ≥ 690 | MPa |
| yield_strength | ≥ 210 | ≥ 440 | MPa |
| elongation | ≥ 45 | — | % |
Compatibility Assessment
304 Stainless Steel and 440C / X105CrMo17 have moderate differences (52% overlap). They are generally not direct substitutes. Consider the specific requirements of your application.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 304 Stainless Steel the same as 440C / X105CrMo17?
304 Stainless Steel and 440C / X105CrMo17 have a 52% composition overlap. They are generally not directly interchangeable.
Can I replace 304 Stainless Steel with 440C / X105CrMo17?
Generally not recommended. The compositions differ significantly (52% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 304 Stainless Steel and 440C / X105CrMo17?
The main differences are in the following elements: C, Cr. 304 Stainless Steel is a Stainless Steel grade, while 440C / X105CrMo17 is a Stainless Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.