304 Stainless Steel vs X10CrNi18-8: 57% composition overlap. Moderate differences, generally not direct substitutes.
304 Stainless Steel vs X10CrNi18-8
Side-by-side chemical composition and mechanical property comparison.
Overview
304 Stainless Steel
1.4301
The most widely used austenitic stainless steel. Excellent corrosion resistance, good formability and weldability. Standard choice for food processing, chemical, and architectural applications.
X10CrNi18-8
1.4310
Work-hardening austenitic stainless — AISI 301. Higher C (0.05-0.15%) than 301LN enables extreme cold-work strengthening to UTS 1300+ MPa in full-hard temper. THE spring-temper stainless: used for flat springs, retaining clips, conveyor belts, automotive structural parts, and rail car body panels. Corrosion resistance similar to 304 in annealed state.
| 304 Stainless Steel | X10CrNi18-8 | |
|---|---|---|
| Material Number | 1.4301 | 1.4310 |
| Category | Stainless Steel | Stainless Steel |
| Standard | EN 10088-2 | EN 10088-2 |
Chemical composition (wt%)
| Element | 304 Stainless Steel | X10CrNi18-8 | Overlap |
|---|---|---|---|
| C | 0–0.07% | 0.05–0.15% | Partial |
| Si | 0–1% | 0–2% | OK |
| Mn | 0–2% | 0–2% | OK |
| P | 0–0.045% | ≤ 0.045% | OK |
Mechanical properties
| Property | 304 Stainless Steel | X10CrNi18-8 | Unit |
|---|---|---|---|
| tensile_strength | 520–720 | 520–720 | MPa |
| yield_strength | ≥ 210 | ≥ 210 | MPa |
| elongation | ≥ 45 | ≥ 40 | % |
Compatibility Assessment
304 Stainless Steel and X10CrNi18-8 have moderate differences (57% overlap). They are generally not direct substitutes. Consider the specific requirements of your application.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 304 Stainless Steel the same as X10CrNi18-8?
304 Stainless Steel and X10CrNi18-8 have a 57% composition overlap. They are generally not directly interchangeable.
Can I replace 304 Stainless Steel with X10CrNi18-8?
Generally not recommended. The compositions differ significantly (57% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 304 Stainless Steel and X10CrNi18-8?
The main differences are in the following elements: C, Cr, Ni. 304 Stainless Steel is a Stainless Steel grade, while X10CrNi18-8 is a Stainless Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.