304L vs X12CrNi25-21: 37% composition overlap. Significantly different materials serving different application areas.
304L vs X12CrNi25-21
Side-by-side chemical composition and mechanical property comparison.
Overview
304L
1.4307
Low-carbon version of 304. Maximum 0.030% C prevents sensitization during welding — no post-weld heat treatment needed. The standard choice for welded structures in food, chemical, and pharmaceutical industries. Often dual-certified with 1.4301.
X12CrNi25-21
1.4845
Heat-resistant 25Cr-21Ni austenitic stainless — AISI 310S (low-C variant). Oxidation resistance to 1050°C continuous, 1150°C intermittent. Higher Cr+Ni than 304/316 = much better high-temperature scaling resistance. Used for furnace parts, radiant tubes, heat treatment fixtures, kiln linings, and thermocouple protection tubes. Also used in petrochemical cracker tubes.
| 304L | X12CrNi25-21 | |
|---|---|---|
| Material Number | 1.4307 | 1.4845 |
| Category | Stainless Steel | Stainless Steel |
| Standard | EN 10088-2 | EN 10095 |
Chemical composition (wt%) — Pro
| Element | 304L | X12CrNi25-21 | Overlap |
|---|---|---|---|
| C | 0–0.03% | 0–0.15% | OK |
| Si | 0–1% | 0–1.5% | OK |
| Mn | 0–2% | 0–2% | OK |
| P | 0–0.045% | — | — |
| S | |||
| Cr | |||
| Ni | |||
| N |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeMechanical properties — Pro
| Property | 304L | X12CrNi25-21 | Unit |
|---|---|---|---|
| Tensile Strength | 500–700 | 490–690 | MPa |
| Yield Strength | ≥ 200 | ≥ 190 | MPa |
| Elongation | ≥ 45 | ≥ 35 | % |
| Hardness HB | |||
| Elastic Modulus | |||
| Density |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeCompatibility Assessment
304L and X12CrNi25-21 have significantly different compositions (37% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 304L the same as X12CrNi25-21?
304L and X12CrNi25-21 have a 37% composition overlap. They are generally not directly interchangeable.
Can I replace 304L with X12CrNi25-21?
Generally not recommended. The compositions differ significantly (37% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 304L and X12CrNi25-21?
The main differences are in the following elements: Cr, Ni. 304L is a Stainless Steel grade, while X12CrNi25-21 is a Stainless Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.