316 / X5CrNiMo17-12-2 vs X2CrNiMo18-14-3: 52% composition overlap. Moderate differences, generally not direct substitutes.
316 / X5CrNiMo17-12-2 vs X2CrNiMo18-14-3
Side-by-side chemical composition and mechanical property comparison.
Overview
316 / X5CrNiMo17-12-2
1.4401
Standard-carbon austenitic stainless steel with molybdenum. Higher C than 316L (max 0.07% vs 0.03%) giving slightly higher strength. Same corrosion resistance as 316L. Used where welding is not required or post-weld solution annealing is possible.
X2CrNiMo18-14-3
1.4435
Higher-alloy variant of 316L — Ni 12.5-15.0% (vs 10.0-13.0 for 1.4404) and Mo 2.5-3.0%. Guaranteed delta-ferrite free (essential for pharmaceutical/biotech electropolished surfaces). THE pharma and biotech process equipment stainless. Also used for chemical plant and food processing where maximum pitting resistance in the 316-family is needed.
| 316 / X5CrNiMo17-12-2 | X2CrNiMo18-14-3 | |
|---|---|---|
| Material Number | 1.4401 | 1.4435 |
| Category | Stainless Steel | Stainless Steel |
| Standard | EN 10088-2 | EN 10088-3 |
Chemical composition (wt%)
| Element | 316 / X5CrNiMo17-12-2 | X2CrNiMo18-14-3 | Overlap |
|---|---|---|---|
| C | 0–0.07% | 0–0.03% | OK |
| Si | 0–1% | 0–1% | OK |
| Mn | 0–2% | 0–2% | OK |
| P | 0–0.045% | — | — |
Mechanical properties
| Property | 316 / X5CrNiMo17-12-2 | X2CrNiMo18-14-3 | Unit |
|---|---|---|---|
| tensile_strength | 530–680 | 490–690 | MPa |
| yield_strength | ≥ 220 | ≥ 190 | MPa |
| elongation | ≥ 40 | ≥ 40 | % |
Compatibility Assessment
316 / X5CrNiMo17-12-2 and X2CrNiMo18-14-3 have moderate differences (52% overlap). They are generally not direct substitutes. Consider the specific requirements of your application.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 316 / X5CrNiMo17-12-2 the same as X2CrNiMo18-14-3?
316 / X5CrNiMo17-12-2 and X2CrNiMo18-14-3 have a 52% composition overlap. They are generally not directly interchangeable.
Can I replace 316 / X5CrNiMo17-12-2 with X2CrNiMo18-14-3?
Generally not recommended. The compositions differ significantly (52% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 316 / X5CrNiMo17-12-2 and X2CrNiMo18-14-3?
The main differences are in the following elements: Cr, Mo, Ni. 316 / X5CrNiMo17-12-2 is a Stainless Steel grade, while X2CrNiMo18-14-3 is a Stainless Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.