316Ti vs 420C / X46Cr13: 48% composition overlap. Significantly different materials serving different application areas.
316Ti vs 420C / X46Cr13
Side-by-side chemical composition and mechanical property comparison.
Overview
316Ti
1.4571
Titanium-stabilized austenitic stainless steel with molybdenum. Stabilization prevents sensitization during prolonged high-temperature exposure. Very popular in Germany for chemical, pharmaceutical, and food processing. Being replaced internationally by 316L (1.4404) for most applications.
420C / X46Cr13
1.4034
High-carbon martensitic stainless steel. Higher hardness than 410 (up to 56 HRC). The standard knife steel for European cutlery. Used for kitchen knives, pocket knives, surgical scalpels, machine blades, roller bearings, and valve components. Not weldable.
| 316Ti | 420C / X46Cr13 | |
|---|---|---|
| Material Number | 1.4571 | 1.4034 |
| Category | Stainless Steel | Stainless Steel |
| Standard | EN 10088-2 | EN 10088-3 |
Chemical composition (wt%)
| Element | 316Ti | 420C / X46Cr13 | Overlap |
|---|---|---|---|
| C | 0–0.08% | 0.43–0.5% | No overlap |
| Si | 0–1% | 0–1% | OK |
| Mn | 0–2% | 0–1% | OK |
| P | 0–0.045% | 0–0.04% | OK |
Mechanical properties
| Property | 316Ti | 420C / X46Cr13 | Unit |
|---|---|---|---|
| tensile_strength | 500–700 | — | MPa |
| yield_strength | ≥ 200 | — | MPa |
| elongation | ≥ 40 | — | % |
Compatibility Assessment
316Ti and 420C / X46Cr13 have significantly different compositions (48% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 316Ti the same as 420C / X46Cr13?
316Ti and 420C / X46Cr13 have a 48% composition overlap. They are generally not directly interchangeable.
Can I replace 316Ti with 420C / X46Cr13?
Generally not recommended. The compositions differ significantly (48% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 316Ti and 420C / X46Cr13?
The main differences are in the following elements: C, Cr. 316Ti is a Stainless Steel grade, while 420C / X46Cr13 is a Stainless Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.