316Ti vs 430 Stainless Steel: 69% composition overlap. Moderate differences, generally not direct substitutes.
316Ti vs 430 Stainless Steel
Side-by-side chemical composition and mechanical property comparison.
Overview
316Ti
1.4571
Titanium-stabilized austenitic stainless steel with molybdenum. Stabilization prevents sensitization during prolonged high-temperature exposure. Very popular in Germany for chemical, pharmaceutical, and food processing. Being replaced internationally by 316L (1.4404) for most applications.
430 Stainless Steel
1.4016
Ferritic chromium stainless steel with good corrosion resistance and formability. Lower cost than austenitic grades. Used for automotive trim, kitchen sinks, architectural panels, and appliance components.
| 316Ti | 430 Stainless Steel | |
|---|---|---|
| Material Number | 1.4571 | 1.4016 |
| Category | Stainless Steel | Stainless Steel |
| Standard | EN 10088-2 | EN 10088-2 |
Chemical composition (wt%)
| Element | 316Ti | 430 Stainless Steel | Overlap |
|---|---|---|---|
| C | 0–0.08% | 0–0.08% | OK |
| Si | 0–1% | 0–1% | OK |
| Mn | 0–2% | 0–1% | OK |
| P | 0–0.045% | 0–0.04% | OK |
Mechanical properties
| Property | 316Ti | 430 Stainless Steel | Unit |
|---|---|---|---|
| tensile_strength | 500–700 | 450–600 | MPa |
| yield_strength | ≥ 200 | ≥ 260 | MPa |
| elongation | ≥ 40 | ≥ 20 | % |
Compatibility Assessment
316Ti and 430 Stainless Steel have moderate differences (69% overlap). They are generally not direct substitutes. Consider the specific requirements of your application.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 316Ti the same as 430 Stainless Steel?
316Ti and 430 Stainless Steel have a 69% composition overlap. They are generally not directly interchangeable.
Can I replace 316Ti with 430 Stainless Steel?
Generally not recommended. The compositions differ significantly (69% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 316Ti and 430 Stainless Steel?
The main differences are in the following elements: Cr. 316Ti is a Stainless Steel grade, while 430 Stainless Steel is a Stainless Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.