316Ti vs X6CrNiTi18-10: 82% composition overlap. Some similarities but notable differences in alloying elements.
316Ti vs X6CrNiTi18-10
Side-by-side chemical composition and mechanical property comparison.
Overview
316Ti
1.4571
Titanium-stabilized austenitic stainless steel with molybdenum. Stabilization prevents sensitization during prolonged high-temperature exposure. Very popular in Germany for chemical, pharmaceutical, and food processing. Being replaced internationally by 316L (1.4404) for most applications.
X6CrNiTi18-10
1.4541
Titanium-stabilized austenitic stainless — AISI 321. Ti (5×C min) prevents Cr-carbide sensitization during welding or service at 400-800°C. Same approach as Nb-stabilized 347 (1.4550) but with Ti instead. Better creep resistance than 304/304L at elevated temperature. Used for exhaust manifolds, aircraft exhaust systems, expansion bellows, and high-temperature chemical plant (to ~800°C).
| 316Ti | X6CrNiTi18-10 | |
|---|---|---|
| Material Number | 1.4571 | 1.4541 |
| Category | Stainless Steel | Stainless Steel |
| Standard | EN 10088-2 | EN 10088-3 |
Chemical composition (wt%)
| Element | 316Ti | X6CrNiTi18-10 | Overlap |
|---|---|---|---|
| C | 0–0.08% | 0–0.08% | OK |
| Si | 0–1% | 0–1% | OK |
| Mn | 0–2% | 0–2% | OK |
| P | 0–0.045% | — | — |
Mechanical properties
| Property | 316Ti | X6CrNiTi18-10 | Unit |
|---|---|---|---|
| tensile_strength | 500–700 | 500–700 | MPa |
| yield_strength | ≥ 200 | ≥ 190 | MPa |
| elongation | ≥ 40 | ≥ 40 | % |
Compatibility Assessment
316Ti and X6CrNiTi18-10 share some characteristics (82% overlap) but have notable differences. They may be substitutable in some applications but not all. Verify suitability carefully.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 316Ti the same as X6CrNiTi18-10?
316Ti and X6CrNiTi18-10 have a 82% composition overlap. For most purposes, they can be considered similar.
Can I replace 316Ti with X6CrNiTi18-10?
In many cases, yes. The compositions overlap significantly (82%). However, always verify mechanical property requirements and heat treatment compatibility for your specific application.
What is the difference between 316Ti and X6CrNiTi18-10?
The main differences are in the following elements: Cr, Ni. 316Ti is a Stainless Steel grade, while X6CrNiTi18-10 is a Stainless Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.