EN AW-6060 vs EN AW-6060: 96% composition overlap. Very similar materials, likely interchangeable for most applications.
EN AW-6060 vs EN AW-6060
Side-by-side chemical composition and mechanical property comparison.
Overview
EN AW-6060
3.3206
The most widely extruded aluminum alloy in Europe. Lower strength than 6063 but excellent extrudability and surface quality. Used for architectural profiles (window frames, curtain walls, door frames), furniture, heat sinks, and general-purpose extrusions. T6 temper for structural use; T5 for decorative.
EN AW-6060
3.3206
The most extruded aluminum alloy in Europe — optimized for complex thin-walled extrusion profiles. Lower Mg+Si content than 6063/6082 provides excellent extrudability at moderate strength (UTS ~215 MPa T6). Good corrosion resistance, anodizability (decorative quality), and weldability. The default material for window/door frames, curtain wall mullions, railing systems, heat sinks, LED lighting profiles, and general architectural extrusions. EN AW-6063 is the closest ASTM equivalent.
| EN AW-6060 | EN AW-6060 | |
|---|---|---|
| Material Number | 3.3206 | 3.3206 |
| Category | Aluminum | Aluminum |
| Standard | EN 573-3 | EN 573-3 |
Chemical composition (wt%)
| Element | EN AW-6060 | EN AW-6060 | Overlap |
|---|---|---|---|
| Si | 0.3–0.6% | 0.3–0.6% | OK |
| Mn | 0–0.1% | ≤ 0.1% | OK |
| Cr | 0–0.05% | ≤ 0.05% | OK |
| Cu | 0–0.1% | ≤ 0.1% | OK |
Mechanical properties
| Property | EN AW-6060 | EN AW-6060 | Unit |
|---|---|---|---|
| tensile_strength | ≥ 190 | 190–230 | MPa |
| yield_strength | ≥ 150 | 150–190 | MPa |
| elongation | ≥ 8 | 8–14 | % |
Compatibility Assessment
EN AW-6060 and EN AW-6060 have very similar compositions (96% overlap) and are likely interchangeable for most applications. Verify mechanical properties for your specific use case.
Automated assessment based on composition analysis
Frequently Asked Questions
Is EN AW-6060 the same as EN AW-6060?
EN AW-6060 and EN AW-6060 have a 96% composition overlap. For most purposes, they can be considered similar.
Can I replace EN AW-6060 with EN AW-6060?
In many cases, yes. The compositions overlap significantly (96%). However, always verify mechanical property requirements and heat treatment compatibility for your specific application.
What is the difference between EN AW-6060 and EN AW-6060?
The main differences are in the following elements: overall alloying content. EN AW-6060 is a Aluminum grade, while EN AW-6060 is a Aluminum grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.