EN AW-6061 vs EN AW-7050: 18% composition overlap. Significantly different materials serving different application areas.
EN AW-6061 vs EN AW-7050
Side-by-side chemical composition and mechanical property comparison.
Overview
EN AW-6061
3.3211
The most widely used aluminium alloy in North America. Good balance of strength, corrosion resistance, and machinability. Heat treatable (T6). Used for structural components, automotive parts, marine fittings, bicycle frames, and general engineering. Being replaced by 6082 in European applications.
EN AW-7050
3.4144
High-strength aerospace aluminium developed by Alcoa for thick-plate applications. Zr addition (instead of Cr) reduces quench sensitivity for superior properties in thick sections. T7451 temper gives excellent SCC resistance + fracture toughness. Used for fuselage frames, bulkheads, wing spars, and thick structural aerospace components.
| EN AW-6061 | EN AW-7050 | |
|---|---|---|
| Material Number | 3.3211 | 3.4144 |
| Category | Aluminum | Aluminum |
| Standard | EN 573-3 | AMS 4050 |
Chemical composition (wt%)
| Element | EN AW-6061 | EN AW-7050 | Overlap |
|---|---|---|---|
| Si | 0.4–0.8% | 0–0.12% | No overlap |
| Mn | 0–0.15% | 0–0.1% | OK |
| Cr | 0.04–0.35% | — | — |
| Cu | 0.15–0.4% | 2–2.6% | No overlap |
Mechanical properties
| Property | EN AW-6061 | EN AW-7050 | Unit |
|---|---|---|---|
| tensile_strength | ≥ 290 | ≥ 510 | MPa |
| yield_strength | ≥ 240 | ≥ 450 | MPa |
| elongation | ≥ 8 | ≥ 9 | % |
Compatibility Assessment
EN AW-6061 and EN AW-7050 have significantly different compositions (18% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is EN AW-6061 the same as EN AW-7050?
EN AW-6061 and EN AW-7050 have a 18% composition overlap. They are generally not directly interchangeable.
Can I replace EN AW-6061 with EN AW-7050?
Generally not recommended. The compositions differ significantly (18% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between EN AW-6061 and EN AW-7050?
The main differences are in the following elements: Si, Cu, Mg, Zn. EN AW-6061 is a Aluminum grade, while EN AW-7050 is a Aluminum grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.