ASTM A572 Grade 50 vs C75S: 37% composition overlap. Significantly different materials serving different application areas.
ASTM A572 Grade 50 vs C75S
Side-by-side chemical composition and mechanical property comparison.
Overview
ASTM A572 Grade 50
The most widely used structural steel grade in the United States. 345 MPa (50 ksi) yield strength HSLA steel. Has largely replaced A36 for structural applications due to higher strength-to-weight ratio. Used for building frames, bridges, heavy equipment, and general structural fabrication.
C75S
1.1248
High-carbon spring strip steel — C 0.70-0.80%. Between C67S (0.65-0.72%) and C85S (0.83-0.90%). Good fatigue strength and edge retention. Used for flat springs, leaf springs, saw blades, snap rings, and reed valves. Available as cold-rolled precision strip in hardened & tempered condition (HRC 58-62).
| ASTM A572 Grade 50 | C75S | |
|---|---|---|
| Material Number | — | 1.1248 |
| Category | Carbon Steel | Carbon Steel |
| Standard | ASTM A572 | EN 10132-4 |
Chemical composition (wt%)
| Element | ASTM A572 Grade 50 | C75S | Overlap |
|---|---|---|---|
| C | 0–0.23% | 0.7–0.8% | No overlap |
| Si | 0–0.4% | 0.15–0.35% | OK |
| Mn | 0–1.35% | 0.6–0.9% | OK |
| P | 0–0.04% | 0–0.025% | OK |
Mechanical properties
| Property | ASTM A572 Grade 50 | C75S | Unit |
|---|---|---|---|
| tensile_strength | ≥ 450 | 1250–1500 | MPa |
| yield_strength | ≥ 345 | 1100–1350 | MPa |
| elongation | ≥ 18 | 4–7 | % |
Compatibility Assessment
ASTM A572 Grade 50 and C75S have significantly different compositions (37% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASTM A572 Grade 50 the same as C75S?
ASTM A572 Grade 50 and C75S have a 37% composition overlap. They are generally not directly interchangeable.
Can I replace ASTM A572 Grade 50 with C75S?
Generally not recommended. The compositions differ significantly (37% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASTM A572 Grade 50 and C75S?
The main differences are in the following elements: C. ASTM A572 Grade 50 is a Carbon Steel grade, while C75S is a Carbon Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.