ASTM A588 (Corten) vs C67S: 25% composition overlap. Significantly different materials serving different application areas.
ASTM A588 (Corten) vs C67S
Side-by-side chemical composition and mechanical property comparison.
Overview
ASTM A588 (Corten)
High-strength low-alloy weathering steel. Forms a stable protective rust patina eliminating the need for paint. Cu-Cr-Ni-V composition provides 4-8x atmospheric corrosion resistance vs carbon steel. Used for unpainted bridges, architectural facades, sculptures, outdoor structures, and freight cars.
C67S
1.1231
Unalloyed cold-rolled spring strip steel — THE standard flat spring material. 0.65% C gives high hardness after hardening (HRC 60+). Very good fatigue properties when properly heat-treated. Much cheaper than alloyed spring steels (51CrV4, 55Cr3). Used for flat springs, circlips/snap rings, saw blades, scrapers, reed valves, and leaf springs in small dimensions.
| ASTM A588 (Corten) | C67S | |
|---|---|---|
| Material Number | — | 1.1231 |
| Category | Carbon Steel | Carbon Steel |
| Standard | ASTM A588 | EN 10132-4 |
Chemical composition (wt%)
| Element | ASTM A588 (Corten) | C67S | Overlap |
|---|---|---|---|
| C | 0–0.19% | 0.65–0.72% | No overlap |
| Si | 0.3–0.65% | 0.15–0.35% | Partial |
| Mn | 0.8–1.25% | 0.5–0.8% | Partial |
| P | 0–0.04% | 0–0.025% | OK |
Mechanical properties
| Property | ASTM A588 (Corten) | C67S | Unit |
|---|---|---|---|
| tensile_strength | ≥ 485 | 1200–1500 | MPa |
| yield_strength | ≥ 345 | 1050–1300 | MPa |
| elongation | ≥ 18 | 5–8 | % |
Compatibility Assessment
ASTM A588 (Corten) and C67S have significantly different compositions (25% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASTM A588 (Corten) the same as C67S?
ASTM A588 (Corten) and C67S have a 25% composition overlap. They are generally not directly interchangeable.
Can I replace ASTM A588 (Corten) with C67S?
Generally not recommended. The compositions differ significantly (25% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASTM A588 (Corten) and C67S?
The main differences are in the following elements: C, Si, Mn. ASTM A588 (Corten) is a Carbon Steel grade, while C67S is a Carbon Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.