ASTM A588 (Corten) vs S500MC: 42% composition overlap. Significantly different materials serving different application areas.
ASTM A588 (Corten) vs S500MC
Side-by-side chemical composition and mechanical property comparison.
Overview
ASTM A588 (Corten)
High-strength low-alloy weathering steel. Forms a stable protective rust patina eliminating the need for paint. Cu-Cr-Ni-V composition provides 4-8x atmospheric corrosion resistance vs carbon steel. Used for unpainted bridges, architectural facades, sculptures, outdoor structures, and freight cars.
S500MC
1.0984
High-strength low-alloy (HSLA) hot-rolled steel for cold forming. Thermomechanically rolled for fine grain structure. 500 MPa yield strength with excellent cold formability. Used for automotive chassis, truck frames, crane booms, and agricultural equipment.
| ASTM A588 (Corten) | S500MC | |
|---|---|---|
| Material Number | — | 1.0984 |
| Category | Carbon Steel | Carbon Steel |
| Standard | ASTM A588 | EN 10149-2 |
Chemical composition (wt%)
| Element | ASTM A588 (Corten) | S500MC | Overlap |
|---|---|---|---|
| C | 0–0.19% | 0–0.12% | OK |
| Si | 0.3–0.65% | 0–0.5% | Partial |
| Mn | 0.8–1.25% | 0–1.7% | OK |
| P | 0–0.04% | 0–0.025% | OK |
Mechanical properties
| Property | ASTM A588 (Corten) | S500MC | Unit |
|---|---|---|---|
| tensile_strength | ≥ 485 | 550–700 | MPa |
| yield_strength | ≥ 345 | ≥ 500 | MPa |
| elongation | ≥ 18 | ≥ 12 | % |
Compatibility Assessment
ASTM A588 (Corten) and S500MC have significantly different compositions (42% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASTM A588 (Corten) the same as S500MC?
ASTM A588 (Corten) and S500MC have a 42% composition overlap. They are generally not directly interchangeable.
Can I replace ASTM A588 (Corten) with S500MC?
Generally not recommended. The compositions differ significantly (42% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASTM A588 (Corten) and S500MC?
The main differences are in the following elements: Si. ASTM A588 (Corten) is a Carbon Steel grade, while S500MC is a Carbon Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.