ASTM A588 (Corten) vs S690Q: 39% composition overlap. Significantly different materials serving different application areas.
ASTM A588 (Corten) vs S690Q
Side-by-side chemical composition and mechanical property comparison.
Overview
ASTM A588 (Corten)
High-strength low-alloy weathering steel. Forms a stable protective rust patina eliminating the need for paint. Cu-Cr-Ni-V composition provides 4-8x atmospheric corrosion resistance vs carbon steel. Used for unpainted bridges, architectural facades, sculptures, outdoor structures, and freight cars.
S690Q
1.8928
High-strength quenched and tempered structural steel — YS 690 MPa min. Part of EN 10025-6 series (S500Q to S960Q). Good weldability despite high strength (CEV controlled). Used for mobile cranes, mining equipment, truck chassis, bridge components, and any structure where weight reduction through higher strength is critical. "Q" = quenched, "L" variants add low-temp impact.
| ASTM A588 (Corten) | S690Q | |
|---|---|---|
| Material Number | — | 1.8928 |
| Category | Carbon Steel | Carbon Steel |
| Standard | ASTM A588 | EN 10025-6 |
Chemical composition (wt%)
| Element | ASTM A588 (Corten) | S690Q | Overlap |
|---|---|---|---|
| C | 0–0.19% | 0–0.2% | OK |
| Si | 0.3–0.65% | 0–0.8% | OK |
| Mn | 0.8–1.25% | 0–1.7% | OK |
| P | 0–0.04% | 0–0.02% | OK |
Mechanical properties
| Property | ASTM A588 (Corten) | S690Q | Unit |
|---|---|---|---|
| tensile_strength | ≥ 485 | 770–940 | MPa |
| yield_strength | ≥ 345 | ≥ 690 | MPa |
| elongation | ≥ 18 | ≥ 14 | % |
Compatibility Assessment
ASTM A588 (Corten) and S690Q have significantly different compositions (39% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASTM A588 (Corten) the same as S690Q?
ASTM A588 (Corten) and S690Q have a 39% composition overlap. They are generally not directly interchangeable.
Can I replace ASTM A588 (Corten) with S690Q?
Generally not recommended. The compositions differ significantly (39% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASTM A588 (Corten) and S690Q?
The main differences are in the following elements: overall alloying content. ASTM A588 (Corten) is a Carbon Steel grade, while S690Q is a Carbon Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.