Automated comparison · 0% overlap

ABS vs PE 100 (HDPE Pipe Grade): 0% composition overlap. Significantly different materials serving different application areas.

ABS vs PE 100 (HDPE Pipe Grade)

Side-by-side chemical composition and mechanical property comparison.

Overview

ABS

Polymerscommodity_plastics

Acrylonitrile Butadiene Styrene — the most widely used amorphous engineering/commodity thermoplastic. Excellent balance of toughness, rigidity, and processability. Good surface finish and paintability. Not UV-stable without additives. Trade names include Novodur (INEOS Styrolution), Terluran (INEOS), Cycolac (SABIC). Used for automotive interior trim, appliance housings (vacuum cleaners, monitors), LEGO bricks, 3D printing filament, and pipe fittings.

PE 100 (HDPE Pipe Grade)

PolymersEngineering

High-density polyethylene pipe grade with MRS (Minimum Required Strength) of 10 MPa at 20°C/50 years. The global standard material for pressurized gas and water distribution pipelines (DN 20 to DN 2000). Bimodal molecular weight distribution provides excellent ESCR (Environmental Stress Crack Resistance), slow crack growth resistance and impact strength. SDR ratings from 7.4 to 26. Fusion-weldable (butt, electro, socket). Operating temperature -40°C to +60°C. Compliant with ISO 4427 (water) and ISO 4437 (gas).

	ABS	PE 100 (HDPE Pipe Grade)
Material Number	—	—
Category	Polymers	Polymers
Standard	ISO 10350	ISO 4427

Mechanical properties

Property	ABS	PE 100 (HDPE Pipe Grade)	Unit
tensile_strength	38–50	—	MPa
yield_strength	40–48	—	MPa
elongation	10–30	—	%

e_modulus	2–2.6	—	GPa
density	1.04–1.07	—	g/cm3
glass_transition_temp	100–110	—	°C
water_absorption_24h	0.2–0.4	—	%
Tensile Strength	40–50	20–25	MPa
Tensile Modulus	2100–2600	900–1200	MPa
Elongation at Break	10–50	600–1000	%
Charpy Impact (notched)	15–25	—	kJ/m²
Density	1.04–1.07	0.955–0.965	g/cm³
HDT/B (0.45 MPa)	90–105	—	°C
Vicat Softening Temp	96–110	—	°C
Water Absorption (24h)	0.2–0.4	0.01–0.02	%
MRS (Minimum Required Strength)	—	10	MPa
Melting Point	—	128–135	°C
Charpy Impact (notched, 23°C)	—	≥ 10	kJ/m²

Compatibility Assessment

ABS and PE 100 (HDPE Pipe Grade) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.

Automated assessment based on composition analysis

Frequently Asked Questions

Is ABS the same as PE 100 (HDPE Pipe Grade)?

ABS and PE 100 (HDPE Pipe Grade) have a 0% composition overlap. They are generally not directly interchangeable.

Can I replace ABS with PE 100 (HDPE Pipe Grade)?

Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.

What is the difference between ABS and PE 100 (HDPE Pipe Grade)?

The main differences are in the following elements: overall alloying content. ABS is a Polymers grade, while PE 100 (HDPE Pipe Grade) is a Polymers grade.

Related Comparisons

PC/ABS (Blend)vsABS PC (Polycarbonate)vsABS

View full data for each material:

ABS details PE 100 (HDPE Pipe Grade) details

Data provided for reference only. Always verify against the applicable specification for critical applications.

All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.