ABS vs PP-C (Polypropylene Copolymer): 0% composition overlap. Significantly different materials serving different application areas.
ABS vs PP-C (Polypropylene Copolymer)
Side-by-side chemical composition and mechanical property comparison.
Overview
ABS
Acrylonitrile Butadiene Styrene — the most widely used amorphous engineering/commodity thermoplastic. Excellent balance of toughness, rigidity, and processability. Good surface finish and paintability. Not UV-stable without additives. Trade names include Novodur (INEOS Styrolution), Terluran (INEOS), Cycolac (SABIC). Used for automotive interior trim, appliance housings (vacuum cleaners, monitors), LEGO bricks, 3D printing filament, and pipe fittings.
PP-C (Polypropylene Copolymer)
Polypropylene copolymer (random or block) — better impact resistance at low temperatures than PP homopolymer (PP-H). Random copolymer: excellent clarity for packaging. Block copolymer: high impact for automotive bumpers, containers, and household appliances. Trade names: Moplen (LyondellBasell), Hostalen (LyondellBasell). THE automotive interior/exterior polymer alongside ABS.
| ABS | PP-C (Polypropylene Copolymer) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 10350 | ISO 1133 |
Mechanical properties
| Property | ABS | PP-C (Polypropylene Copolymer) | Unit |
|---|---|---|---|
| tensile_strength | 38–50 | 20–30 | MPa |
| yield_strength | 40–48 | — | MPa |
| elongation | 10–30 | 100–600 | % |
Compatibility Assessment
ABS and PP-C (Polypropylene Copolymer) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ABS the same as PP-C (Polypropylene Copolymer)?
ABS and PP-C (Polypropylene Copolymer) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace ABS with PP-C (Polypropylene Copolymer)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ABS and PP-C (Polypropylene Copolymer)?
The main differences are in the following elements: overall alloying content. ABS is a Polymers grade, while PP-C (Polypropylene Copolymer) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.