ASA (Acrylonitrile-Styrene-Acrylate) vs PA12 (Nylon 12): 0% composition overlap. Significantly different materials serving different application areas.
ASA (Acrylonitrile-Styrene-Acrylate) vs PA12 (Nylon 12)
Side-by-side chemical composition and mechanical property comparison.
Overview
ASA (Acrylonitrile-Styrene-Acrylate)
UV-resistant alternative to ABS — acrylic rubber replaces butadiene for excellent weatherability. Retains color and gloss outdoors for years without coating. Similar mechanical properties to ABS but with 10× better UV resistance. Trade names: Luran S (BASF/INEOS), Geloy (SABIC). Used for automotive exterior trim, outdoor electrical housings, garden furniture, and building cladding.
PA12 (Nylon 12)
Polyamide 12 — the long-chain polyamide with the lowest moisture absorption of all PA grades (0.1-0.15% vs PA6: 1.5%). Excellent dimensional stability in humid environments. Best chemical resistance among polyamides (oils, fuels, hydraulic fluids). Lowest density of all PA (1.01 g/cm³). Also the dominant 3D printing (SLS/MJF) material. Trade names include Rilsamid (Arkema), Grilamid L (EMS), TECAMID 12 (Ensinger), Vestamid L (Evonik). Used for fuel lines, brake lines, pneumatic tubing, cable sheathing, and 3D-printed functional parts.
| ASA (Acrylonitrile-Styrene-Acrylate) | PA12 (Nylon 12) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 6402 | ISO 10350 |
Mechanical properties
| Property | ASA (Acrylonitrile-Styrene-Acrylate) | PA12 (Nylon 12) | Unit |
|---|---|---|---|
| tensile_strength | 40–55 | 45–60 | MPa |
| elongation | 15–35 | 100–300 | % |
| e_modulus | 2200–2600 | 1.1–1.6 | MPa |
Compatibility Assessment
ASA (Acrylonitrile-Styrene-Acrylate) and PA12 (Nylon 12) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASA (Acrylonitrile-Styrene-Acrylate) the same as PA12 (Nylon 12)?
ASA (Acrylonitrile-Styrene-Acrylate) and PA12 (Nylon 12) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace ASA (Acrylonitrile-Styrene-Acrylate) with PA12 (Nylon 12)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASA (Acrylonitrile-Styrene-Acrylate) and PA12 (Nylon 12)?
The main differences are in the following elements: overall alloying content. ASA (Acrylonitrile-Styrene-Acrylate) is a Polymers grade, while PA12 (Nylon 12) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.