ASA (Acrylonitrile-Styrene-Acrylate) vs PBT GF30: 0% composition overlap. Significantly different materials serving different application areas.
ASA (Acrylonitrile-Styrene-Acrylate) vs PBT GF30
Side-by-side chemical composition and mechanical property comparison.
Overview
ASA (Acrylonitrile-Styrene-Acrylate)
UV-resistant alternative to ABS — acrylic rubber replaces butadiene for excellent weatherability. Retains color and gloss outdoors for years without coating. Similar mechanical properties to ABS but with 10× better UV resistance. Trade names: Luran S (BASF/INEOS), Geloy (SABIC). Used for automotive exterior trim, outdoor electrical housings, garden furniture, and building cladding.
PBT GF30
Polybutylene Terephthalate with 30% glass fiber — THE connector and electrical component material. Key advantage over PA6 GF30: near-zero moisture absorption (0.02-0.2%), so mechanical and electrical properties are stable regardless of humidity. Lower UTS than PA6 GF30 but consistent. Trade names include Ultradur B4300 G6 (BASF), Valox 420 (SABIC), Celanex (Celanese), Crastin (DuPont). Used for electrical connectors, relay housings, coil formers, automotive sensors, and any part requiring dimensional stability in humid environments.
| ASA (Acrylonitrile-Styrene-Acrylate) | PBT GF30 | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 6402 | ISO 10350 |
Mechanical properties
| Property | ASA (Acrylonitrile-Styrene-Acrylate) | PBT GF30 | Unit |
|---|---|---|---|
| tensile_strength | 40–55 | 145–165 | MPa |
| elongation | 15–35 | 2–3 | % |
| e_modulus | 2200–2600 | 9.5–11 | MPa |
Compatibility Assessment
ASA (Acrylonitrile-Styrene-Acrylate) and PBT GF30 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASA (Acrylonitrile-Styrene-Acrylate) the same as PBT GF30?
ASA (Acrylonitrile-Styrene-Acrylate) and PBT GF30 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace ASA (Acrylonitrile-Styrene-Acrylate) with PBT GF30?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASA (Acrylonitrile-Styrene-Acrylate) and PBT GF30?
The main differences are in the following elements: overall alloying content. ASA (Acrylonitrile-Styrene-Acrylate) is a Polymers grade, while PBT GF30 is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.