ASA (Acrylonitrile-Styrene-Acrylate) vs PE 100 (HDPE Pipe Grade): 0% composition overlap. Significantly different materials serving different application areas.
ASA (Acrylonitrile-Styrene-Acrylate) vs PE 100 (HDPE Pipe Grade)
Side-by-side chemical composition and mechanical property comparison.
Overview
ASA (Acrylonitrile-Styrene-Acrylate)
UV-resistant alternative to ABS — acrylic rubber replaces butadiene for excellent weatherability. Retains color and gloss outdoors for years without coating. Similar mechanical properties to ABS but with 10× better UV resistance. Trade names: Luran S (BASF/INEOS), Geloy (SABIC). Used for automotive exterior trim, outdoor electrical housings, garden furniture, and building cladding.
PE 100 (HDPE Pipe Grade)
High-density polyethylene pipe grade with MRS (Minimum Required Strength) of 10 MPa at 20°C/50 years. The global standard material for pressurized gas and water distribution pipelines (DN 20 to DN 2000). Bimodal molecular weight distribution provides excellent ESCR (Environmental Stress Crack Resistance), slow crack growth resistance and impact strength. SDR ratings from 7.4 to 26. Fusion-weldable (butt, electro, socket). Operating temperature -40°C to +60°C. Compliant with ISO 4427 (water) and ISO 4437 (gas).
| ASA (Acrylonitrile-Styrene-Acrylate) | PE 100 (HDPE Pipe Grade) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 6402 | ISO 4427 |
Mechanical properties
| Property | ASA (Acrylonitrile-Styrene-Acrylate) | PE 100 (HDPE Pipe Grade) | Unit |
|---|---|---|---|
| tensile_strength | 40–55 | — | MPa |
| elongation | 15–35 | — | % |
| e_modulus | 2200–2600 | — | MPa |
Compatibility Assessment
ASA (Acrylonitrile-Styrene-Acrylate) and PE 100 (HDPE Pipe Grade) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASA (Acrylonitrile-Styrene-Acrylate) the same as PE 100 (HDPE Pipe Grade)?
ASA (Acrylonitrile-Styrene-Acrylate) and PE 100 (HDPE Pipe Grade) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace ASA (Acrylonitrile-Styrene-Acrylate) with PE 100 (HDPE Pipe Grade)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASA (Acrylonitrile-Styrene-Acrylate) and PE 100 (HDPE Pipe Grade)?
The main differences are in the following elements: overall alloying content. ASA (Acrylonitrile-Styrene-Acrylate) is a Polymers grade, while PE 100 (HDPE Pipe Grade) is a Polymers grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.