ASA (Acrylonitrile-Styrene-Acrylate) vs PE-HD: 0% composition overlap. Significantly different materials serving different application areas.
ASA (Acrylonitrile-Styrene-Acrylate) vs PE-HD
Side-by-side chemical composition and mechanical property comparison.
Overview
ASA (Acrylonitrile-Styrene-Acrylate)
UV-resistant alternative to ABS — acrylic rubber replaces butadiene for excellent weatherability. Retains color and gloss outdoors for years without coating. Similar mechanical properties to ABS but with 10× better UV resistance. Trade names: Luran S (BASF/INEOS), Geloy (SABIC). Used for automotive exterior trim, outdoor electrical housings, garden furniture, and building cladding.
PE-HD
High Density Polyethylene — the highest-volume plastic globally (>30M tons/year). Linear chains with minimal branching give higher density and strength vs LDPE. Excellent chemical resistance, FDA/food-safe, very low moisture absorption, and good impact resistance down to -30°C. Used for pipes, bottles, containers, fuel tanks, cutting boards, playground equipment, and geomembranes.
| ASA (Acrylonitrile-Styrene-Acrylate) | PE-HD | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 6402 | ISO 1872 |
Mechanical properties
| Property | ASA (Acrylonitrile-Styrene-Acrylate) | PE-HD | Unit |
|---|---|---|---|
| tensile_strength | 40–55 | 25–38 | MPa |
| elongation | 15–35 | 100–1000 | % |
| e_modulus | 2200–2600 | 0.8–1.4 | MPa |
Compatibility Assessment
ASA (Acrylonitrile-Styrene-Acrylate) and PE-HD have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASA (Acrylonitrile-Styrene-Acrylate) the same as PE-HD?
ASA (Acrylonitrile-Styrene-Acrylate) and PE-HD have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace ASA (Acrylonitrile-Styrene-Acrylate) with PE-HD?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASA (Acrylonitrile-Styrene-Acrylate) and PE-HD?
The main differences are in the following elements: overall alloying content. ASA (Acrylonitrile-Styrene-Acrylate) is a Polymers grade, while PE-HD is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.