ASA (Acrylonitrile-Styrene-Acrylate) vs PP-C (Polypropylene Copolymer): 0% composition overlap. Significantly different materials serving different application areas.
ASA (Acrylonitrile-Styrene-Acrylate) vs PP-C (Polypropylene Copolymer)
Side-by-side chemical composition and mechanical property comparison.
Overview
ASA (Acrylonitrile-Styrene-Acrylate)
UV-resistant alternative to ABS — acrylic rubber replaces butadiene for excellent weatherability. Retains color and gloss outdoors for years without coating. Similar mechanical properties to ABS but with 10× better UV resistance. Trade names: Luran S (BASF/INEOS), Geloy (SABIC). Used for automotive exterior trim, outdoor electrical housings, garden furniture, and building cladding.
PP-C (Polypropylene Copolymer)
Polypropylene copolymer (random or block) — better impact resistance at low temperatures than PP homopolymer (PP-H). Random copolymer: excellent clarity for packaging. Block copolymer: high impact for automotive bumpers, containers, and household appliances. Trade names: Moplen (LyondellBasell), Hostalen (LyondellBasell). THE automotive interior/exterior polymer alongside ABS.
| ASA (Acrylonitrile-Styrene-Acrylate) | PP-C (Polypropylene Copolymer) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 6402 | ISO 1133 |
Mechanical properties
| Property | ASA (Acrylonitrile-Styrene-Acrylate) | PP-C (Polypropylene Copolymer) | Unit |
|---|---|---|---|
| tensile_strength | 40–55 | 20–30 | MPa |
| elongation | 15–35 | 100–600 | % |
| e_modulus | 2200–2600 | 800–1300 | MPa |
Compatibility Assessment
ASA (Acrylonitrile-Styrene-Acrylate) and PP-C (Polypropylene Copolymer) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASA (Acrylonitrile-Styrene-Acrylate) the same as PP-C (Polypropylene Copolymer)?
ASA (Acrylonitrile-Styrene-Acrylate) and PP-C (Polypropylene Copolymer) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace ASA (Acrylonitrile-Styrene-Acrylate) with PP-C (Polypropylene Copolymer)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASA (Acrylonitrile-Styrene-Acrylate) and PP-C (Polypropylene Copolymer)?
The main differences are in the following elements: overall alloying content. ASA (Acrylonitrile-Styrene-Acrylate) is a Polymers grade, while PP-C (Polypropylene Copolymer) is a Polymers grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.