ASA (Acrylonitrile-Styrene-Acrylate) vs PP-H (Polypropylene Homopolymer): 0% composition overlap. Significantly different materials serving different application areas.
ASA (Acrylonitrile-Styrene-Acrylate) vs PP-H (Polypropylene Homopolymer)
Side-by-side chemical composition and mechanical property comparison.
Overview
ASA (Acrylonitrile-Styrene-Acrylate)
UV-resistant alternative to ABS — acrylic rubber replaces butadiene for excellent weatherability. Retains color and gloss outdoors for years without coating. Similar mechanical properties to ABS but with 10× better UV resistance. Trade names: Luran S (BASF/INEOS), Geloy (SABIC). Used for automotive exterior trim, outdoor electrical housings, garden furniture, and building cladding.
PP-H (Polypropylene Homopolymer)
Polypropylene Homopolymer — the lightest common engineering plastic (0.905 g/cm³). Excellent chemical resistance (esp. to acids and bases), good fatigue resistance (integral living hinges), and low moisture absorption. Becomes brittle below 0°C. Used for chemical tanks, HVAC ducts, pump housings, food containers, automotive battery cases, and medical lab equipment.
| ASA (Acrylonitrile-Styrene-Acrylate) | PP-H (Polypropylene Homopolymer) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 6402 | ISO 10350 |
Mechanical properties
| Property | ASA (Acrylonitrile-Styrene-Acrylate) | PP-H (Polypropylene Homopolymer) | Unit |
|---|---|---|---|
| tensile_strength | 40–55 | 30–36 | MPa |
| elongation | 15–35 | 70–200 | % |
| e_modulus | 2200–2600 | 1.45–1.6 | MPa |
Compatibility Assessment
ASA (Acrylonitrile-Styrene-Acrylate) and PP-H (Polypropylene Homopolymer) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASA (Acrylonitrile-Styrene-Acrylate) the same as PP-H (Polypropylene Homopolymer)?
ASA (Acrylonitrile-Styrene-Acrylate) and PP-H (Polypropylene Homopolymer) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace ASA (Acrylonitrile-Styrene-Acrylate) with PP-H (Polypropylene Homopolymer)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASA (Acrylonitrile-Styrene-Acrylate) and PP-H (Polypropylene Homopolymer)?
The main differences are in the following elements: overall alloying content. ASA (Acrylonitrile-Styrene-Acrylate) is a Polymers grade, while PP-H (Polypropylene Homopolymer) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.