ASA (Acrylonitrile-Styrene-Acrylate) vs PVC-U (Rigid PVC): 0% composition overlap. Significantly different materials serving different application areas.
ASA (Acrylonitrile-Styrene-Acrylate) vs PVC-U (Rigid PVC)
Side-by-side chemical composition and mechanical property comparison.
Overview
ASA (Acrylonitrile-Styrene-Acrylate)
UV-resistant alternative to ABS — acrylic rubber replaces butadiene for excellent weatherability. Retains color and gloss outdoors for years without coating. Similar mechanical properties to ABS but with 10× better UV resistance. Trade names: Luran S (BASF/INEOS), Geloy (SABIC). Used for automotive exterior trim, outdoor electrical housings, garden furniture, and building cladding.
PVC-U (Rigid PVC)
Unplasticized Polyvinyl Chloride — the second-most produced plastic globally. Hard, rigid, self-extinguishing (LOI 45%), excellent chemical resistance to acids/bases/salts, and very low cost. Key limitation: max service temp only 60°C. Developed in 1930s Germany. Used for water/sewage pipes, window profiles, electrical conduit, cladding, and chemical tanks/fittings. NOT the flexible PVC used in cables — that is PVC-P (plasticized).
| ASA (Acrylonitrile-Styrene-Acrylate) | PVC-U (Rigid PVC) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 6402 | ISO 10350 |
Mechanical properties
| Property | ASA (Acrylonitrile-Styrene-Acrylate) | PVC-U (Rigid PVC) | Unit |
|---|---|---|---|
| tensile_strength | 40–55 | 48–55 | MPa |
| elongation | 15–35 | 30–50 | % |
| e_modulus | 2200–2600 | 2.8–3.2 | MPa |
Compatibility Assessment
ASA (Acrylonitrile-Styrene-Acrylate) and PVC-U (Rigid PVC) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASA (Acrylonitrile-Styrene-Acrylate) the same as PVC-U (Rigid PVC)?
ASA (Acrylonitrile-Styrene-Acrylate) and PVC-U (Rigid PVC) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace ASA (Acrylonitrile-Styrene-Acrylate) with PVC-U (Rigid PVC)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASA (Acrylonitrile-Styrene-Acrylate) and PVC-U (Rigid PVC)?
The main differences are in the following elements: overall alloying content. ASA (Acrylonitrile-Styrene-Acrylate) is a Polymers grade, while PVC-U (Rigid PVC) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.