ASP 2030 (PM High Speed Steel) vs H13 / X40CrMoV5-1: 7% composition overlap. Significantly different materials serving different application areas.
ASP 2030 (PM High Speed Steel) vs H13 / X40CrMoV5-1
Side-by-side chemical composition and mechanical property comparison.
Overview
ASP 2030 (PM High Speed Steel)
Powder metallurgy high speed steel by Erasteel (now Zapp). Co-free PM-HSS with excellent combination of wear resistance and toughness. C 1.28%, Cr 4.2%, Mo 5.0%, W 6.4%, V 3.1%. Hardness 64–67 HRC. Superior carbide distribution vs conventional HSS. Applications: end mills, drills, taps, broaches, cold forging punches, fine blanking tools. Alternative to M42 and S390.
H13 / X40CrMoV5-1
1.2344
The most widely used hot-work tool steel globally. Excellent combination of hot hardness, toughness, and thermal fatigue resistance. Used for die-casting dies (aluminum, zinc, magnesium), forging dies, extrusion tooling, and hot shear blades.
| ASP 2030 (PM High Speed Steel) | H13 / X40CrMoV5-1 | |
|---|---|---|
| Material Number | — | 1.2344 |
| Category | Tool Steel | Tool Steel |
| Standard | Erasteel | EN ISO 4957 |
Chemical composition (wt%) — Pro
| Element | ASP 2030 (PM High Speed Steel) | H13 / X40CrMoV5-1 | Overlap |
|---|---|---|---|
| C | 1.25–1.32% | 0.35–0.42% | No overlap |
| Si | ≤ 0.5% | 0.8–1.2% | No overlap |
| Mn | ≤ 0.4% | 0.25–0.5% | Partial |
| P | — | 0–0.03% | — |
| S | |||
| Cr | |||
| Mo | |||
| V | |||
| W |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeMechanical properties — Pro
| Property | ASP 2030 (PM High Speed Steel) | H13 / X40CrMoV5-1 | Unit |
|---|---|---|---|
| hardness_brinell | ≤ 280 | — | HB |
| hardness_rockwell | 64–67 | — | HRC |
| Density | ≥ 8 | ≥ 7.8 | g/cm3 |
| Hardness HRC | |||
| Hardness HB | |||
| Elastic Modulus |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeCompatibility Assessment
ASP 2030 (PM High Speed Steel) and H13 / X40CrMoV5-1 have significantly different compositions (7% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASP 2030 (PM High Speed Steel) the same as H13 / X40CrMoV5-1?
ASP 2030 (PM High Speed Steel) and H13 / X40CrMoV5-1 have a 7% composition overlap. They are generally not directly interchangeable.
Can I replace ASP 2030 (PM High Speed Steel) with H13 / X40CrMoV5-1?
Generally not recommended. The compositions differ significantly (7% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASP 2030 (PM High Speed Steel) and H13 / X40CrMoV5-1?
The main differences are in the following elements: C, Si, Mn, Cr. ASP 2030 (PM High Speed Steel) is a Tool Steel grade, while H13 / X40CrMoV5-1 is a Tool Steel grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.