C22E vs S275JR: 49% composition overlap. Significantly different materials serving different application areas.
C22E vs S275JR
Side-by-side chemical composition and mechanical property comparison.
Overview
C22E
1.1151
Low-carbon unalloyed steel for case hardening and general engineering — 0.17-0.24% C. After carburizing: surface HRC 55-60, soft tough core. Much cheaper than alloy case-hardening steels (16MnCr5, 20MnCr5). Modern designation for Ck22. Used for pins, bolts, levers, lightly loaded gears, and any carburized part where alloy additions are not justified. Also used as cold-heading wire.
S275JR
1.0044
Medium-strength structural steel with minimum yield strength of 275 MPa. Bridges the gap between S235JR and S355JR. Used for general structural applications, lattice towers, masts, and light crane components. Impact tested at +20°C (JR).
| C22E | S275JR | |
|---|---|---|
| Material Number | 1.1151 | 1.0044 |
| Category | Carbon Steel | Carbon Steel |
| Standard | EN 10083-2 | EN 10025-2 |
Chemical composition (wt%)
| Element | C22E | S275JR | Overlap |
|---|---|---|---|
| C | 0.17–0.24% | 0–0.21% | Partial |
| Si | 0–0.4% | 0–0.6% | OK |
| Mn | 0.4–0.7% | 0–1.5% | OK |
| P | 0–0.025% | 0–0.035% | OK |
Mechanical properties
| Property | C22E | S275JR | Unit |
|---|---|---|---|
| tensile_strength | 410–540 | 410–560 | MPa |
| yield_strength | 240–280 | ≥ 275 | MPa |
| elongation | 22–28 | ≥ 23 | % |
Compatibility Assessment
C22E and S275JR have significantly different compositions (49% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is C22E the same as S275JR?
C22E and S275JR have a 49% composition overlap. They are generally not directly interchangeable.
Can I replace C22E with S275JR?
Generally not recommended. The compositions differ significantly (49% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between C22E and S275JR?
The main differences are in the following elements: C. C22E is a Carbon Steel grade, while S275JR is a Carbon Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.