C22E vs S460NL: 52% composition overlap. Moderate differences, generally not direct substitutes.
C22E vs S460NL
Side-by-side chemical composition and mechanical property comparison.
Overview
C22E
1.1151
Low-carbon unalloyed steel for case hardening and general engineering — 0.17-0.24% C. After carburizing: surface HRC 55-60, soft tough core. Much cheaper than alloy case-hardening steels (16MnCr5, 20MnCr5). Modern designation for Ck22. Used for pins, bolts, levers, lightly loaded gears, and any carburized part where alloy additions are not justified. Also used as cold-heading wire.
S460NL
1.8903
High-strength normalized fine-grain structural steel with 460 MPa yield and impact testing at -50°C. The highest-strength grade in the EN 10025-3 normalized series. Used for offshore platforms, wind turbine towers, arctic bridges, cranes, and heavy steel structures in cold climates.
| C22E | S460NL | |
|---|---|---|
| Material Number | 1.1151 | 1.8903 |
| Category | Carbon Steel | Carbon Steel |
| Standard | EN 10083-2 | EN 10025-3 |
Chemical composition (wt%)
| Element | C22E | S460NL | Overlap |
|---|---|---|---|
| C | 0.17–0.24% | 0–0.2% | Partial |
| Si | 0–0.4% | 0–0.6% | OK |
| Mn | 0.4–0.7% | 1–1.7% | No overlap |
| P | 0–0.025% | 0–0.025% | OK |
Mechanical properties
| Property | C22E | S460NL | Unit |
|---|---|---|---|
| tensile_strength | 410–540 | 540–720 | MPa |
| yield_strength | 240–280 | ≥ 460 | MPa |
| elongation | 22–28 | ≥ 17 | % |
Compatibility Assessment
C22E and S460NL have moderate differences (52% overlap). They are generally not direct substitutes. Consider the specific requirements of your application.
Automated assessment based on composition analysis
Frequently Asked Questions
Is C22E the same as S460NL?
C22E and S460NL have a 52% composition overlap. They are generally not directly interchangeable.
Can I replace C22E with S460NL?
Generally not recommended. The compositions differ significantly (52% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between C22E and S460NL?
The main differences are in the following elements: C, Mn. C22E is a Carbon Steel grade, while S460NL is a Carbon Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.