EPDM (Ethylene Propylene Diene Rubber) vs PA6 (Nylon 6): 0% composition overlap. Significantly different materials serving different application areas.
EPDM (Ethylene Propylene Diene Rubber) vs PA6 (Nylon 6)
Side-by-side chemical composition and mechanical property comparison.
Overview
EPDM (Ethylene Propylene Diene Rubber)
Ethylene propylene diene monomer rubber — THE outdoor/weather elastomer. Saturated backbone gives outstanding ozone, UV, and weathering resistance. Excellent resistance to steam, hot water, and polar solvents. NOT resistant to oils/fuels (opposite of NBR). Good electrical insulation. ρ 0.85-1.3 (lightest common rubber). Used for automotive door/window seals, roofing membranes, radiator hoses, HVAC gaskets, and pond liners.
PA6 (Nylon 6)
Polyamide 6 (Nylon 6) — the most widely used engineering thermoplastic. Excellent combination of mechanical strength, toughness, wear resistance, and chemical resistance. Properties are moisture-sensitive — conditioned (50% RH) values are significantly lower than dry values. Trade names include Ultramid B (BASF), Akulon (DSM), Zytel (DuPont). Used for gears, bearings, bushings, cable ties, structural brackets, and automotive under-hood components.
| EPDM (Ethylene Propylene Diene Rubber) | PA6 (Nylon 6) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 37 | ISO 10350 |
Mechanical properties
| Property | EPDM (Ethylene Propylene Diene Rubber) | PA6 (Nylon 6) | Unit |
|---|---|---|---|
| tensile_strength | 7–21 | 75–85 | MPa |
| elongation | 100–700 | 30–100 | % |
| hardness_shore_a | 30–90 | — | Shore A |
Compatibility Assessment
EPDM (Ethylene Propylene Diene Rubber) and PA6 (Nylon 6) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is EPDM (Ethylene Propylene Diene Rubber) the same as PA6 (Nylon 6)?
EPDM (Ethylene Propylene Diene Rubber) and PA6 (Nylon 6) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace EPDM (Ethylene Propylene Diene Rubber) with PA6 (Nylon 6)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between EPDM (Ethylene Propylene Diene Rubber) and PA6 (Nylon 6)?
The main differences are in the following elements: overall alloying content. EPDM (Ethylene Propylene Diene Rubber) is a Polymers grade, while PA6 (Nylon 6) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.