EPDM (Ethylene Propylene Diene Rubber) vs POM-H (Acetal Homopolymer): 0% composition overlap. Significantly different materials serving different application areas.
EPDM (Ethylene Propylene Diene Rubber) vs POM-H (Acetal Homopolymer)
Side-by-side chemical composition and mechanical property comparison.
Overview
EPDM (Ethylene Propylene Diene Rubber)
Ethylene propylene diene monomer rubber — THE outdoor/weather elastomer. Saturated backbone gives outstanding ozone, UV, and weathering resistance. Excellent resistance to steam, hot water, and polar solvents. NOT resistant to oils/fuels (opposite of NBR). Good electrical insulation. ρ 0.85-1.3 (lightest common rubber). Used for automotive door/window seals, roofing membranes, radiator hoses, HVAC gaskets, and pond liners.
POM-H (Acetal Homopolymer)
Polyoxymethylene Homopolymer — slightly stronger and stiffer than POM-C copolymer but with centerline porosity in stock shapes and lower resistance to hot water/alkalis. Trade names include Delrin (DuPont/DuPont de Nemours) and Tenac (Asahi Kasei). Used for gears, cams, springs, clips, fuel system components, and precision-machined parts where maximum stiffness is needed.
| EPDM (Ethylene Propylene Diene Rubber) | POM-H (Acetal Homopolymer) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 37 | ISO 10350 |
Mechanical properties
| Property | EPDM (Ethylene Propylene Diene Rubber) | POM-H (Acetal Homopolymer) | Unit |
|---|---|---|---|
| tensile_strength | 7–21 | 66–73 | MPa |
| elongation | 100–700 | 15–25 | % |
| hardness_shore_a | 30–90 | — | Shore A |
Compatibility Assessment
EPDM (Ethylene Propylene Diene Rubber) and POM-H (Acetal Homopolymer) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is EPDM (Ethylene Propylene Diene Rubber) the same as POM-H (Acetal Homopolymer)?
EPDM (Ethylene Propylene Diene Rubber) and POM-H (Acetal Homopolymer) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace EPDM (Ethylene Propylene Diene Rubber) with POM-H (Acetal Homopolymer)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between EPDM (Ethylene Propylene Diene Rubber) and POM-H (Acetal Homopolymer)?
The main differences are in the following elements: overall alloying content. EPDM (Ethylene Propylene Diene Rubber) is a Polymers grade, while POM-H (Acetal Homopolymer) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.