EPDM (Ethylene Propylene Diene Rubber) vs PP-H (Polypropylene Homopolymer): 0% composition overlap. Significantly different materials serving different application areas.
EPDM (Ethylene Propylene Diene Rubber) vs PP-H (Polypropylene Homopolymer)
Side-by-side chemical composition and mechanical property comparison.
Overview
EPDM (Ethylene Propylene Diene Rubber)
Ethylene propylene diene monomer rubber — THE outdoor/weather elastomer. Saturated backbone gives outstanding ozone, UV, and weathering resistance. Excellent resistance to steam, hot water, and polar solvents. NOT resistant to oils/fuels (opposite of NBR). Good electrical insulation. ρ 0.85-1.3 (lightest common rubber). Used for automotive door/window seals, roofing membranes, radiator hoses, HVAC gaskets, and pond liners.
PP-H (Polypropylene Homopolymer)
Polypropylene Homopolymer — the lightest common engineering plastic (0.905 g/cm³). Excellent chemical resistance (esp. to acids and bases), good fatigue resistance (integral living hinges), and low moisture absorption. Becomes brittle below 0°C. Used for chemical tanks, HVAC ducts, pump housings, food containers, automotive battery cases, and medical lab equipment.
| EPDM (Ethylene Propylene Diene Rubber) | PP-H (Polypropylene Homopolymer) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 37 | ISO 10350 |
Mechanical properties
| Property | EPDM (Ethylene Propylene Diene Rubber) | PP-H (Polypropylene Homopolymer) | Unit |
|---|---|---|---|
| tensile_strength | 7–21 | 30–36 | MPa |
| elongation | 100–700 | 70–200 | % |
| hardness_shore_a | 30–90 | — | Shore A |
Compatibility Assessment
EPDM (Ethylene Propylene Diene Rubber) and PP-H (Polypropylene Homopolymer) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is EPDM (Ethylene Propylene Diene Rubber) the same as PP-H (Polypropylene Homopolymer)?
EPDM (Ethylene Propylene Diene Rubber) and PP-H (Polypropylene Homopolymer) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace EPDM (Ethylene Propylene Diene Rubber) with PP-H (Polypropylene Homopolymer)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between EPDM (Ethylene Propylene Diene Rubber) and PP-H (Polypropylene Homopolymer)?
The main differences are in the following elements: overall alloying content. EPDM (Ethylene Propylene Diene Rubber) is a Polymers grade, while PP-H (Polypropylene Homopolymer) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.