EPDM (Ethylene Propylene Diene Rubber) vs PVC-U (Rigid PVC): 0% composition overlap. Significantly different materials serving different application areas.
EPDM (Ethylene Propylene Diene Rubber) vs PVC-U (Rigid PVC)
Side-by-side chemical composition and mechanical property comparison.
Overview
EPDM (Ethylene Propylene Diene Rubber)
Ethylene propylene diene monomer rubber — THE outdoor/weather elastomer. Saturated backbone gives outstanding ozone, UV, and weathering resistance. Excellent resistance to steam, hot water, and polar solvents. NOT resistant to oils/fuels (opposite of NBR). Good electrical insulation. ρ 0.85-1.3 (lightest common rubber). Used for automotive door/window seals, roofing membranes, radiator hoses, HVAC gaskets, and pond liners.
PVC-U (Rigid PVC)
Unplasticized Polyvinyl Chloride — the second-most produced plastic globally. Hard, rigid, self-extinguishing (LOI 45%), excellent chemical resistance to acids/bases/salts, and very low cost. Key limitation: max service temp only 60°C. Developed in 1930s Germany. Used for water/sewage pipes, window profiles, electrical conduit, cladding, and chemical tanks/fittings. NOT the flexible PVC used in cables — that is PVC-P (plasticized).
| EPDM (Ethylene Propylene Diene Rubber) | PVC-U (Rigid PVC) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 37 | ISO 10350 |
Mechanical properties
| Property | EPDM (Ethylene Propylene Diene Rubber) | PVC-U (Rigid PVC) | Unit |
|---|---|---|---|
| tensile_strength | 7–21 | 48–55 | MPa |
| elongation | 100–700 | 30–50 | % |
| hardness_shore_a | 30–90 | — | Shore A |
Compatibility Assessment
EPDM (Ethylene Propylene Diene Rubber) and PVC-U (Rigid PVC) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is EPDM (Ethylene Propylene Diene Rubber) the same as PVC-U (Rigid PVC)?
EPDM (Ethylene Propylene Diene Rubber) and PVC-U (Rigid PVC) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace EPDM (Ethylene Propylene Diene Rubber) with PVC-U (Rigid PVC)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between EPDM (Ethylene Propylene Diene Rubber) and PVC-U (Rigid PVC)?
The main differences are in the following elements: overall alloying content. EPDM (Ethylene Propylene Diene Rubber) is a Polymers grade, while PVC-U (Rigid PVC) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.