Epoxy/Carbon Fiber (CFRP) vs POM-H (Acetal Homopolymer): 0% composition overlap. Significantly different materials serving different application areas.
Epoxy/Carbon Fiber (CFRP) vs POM-H (Acetal Homopolymer)
Side-by-side chemical composition and mechanical property comparison.
Overview
Epoxy/Carbon Fiber (CFRP)
Carbon fiber reinforced epoxy — the benchmark structural composite material. Unidirectional ply: tensile strength 1500–2000 MPa, modulus 120–150 GPa at density 1.55 g/cm³ (5x stronger than steel at 1/5 the weight). Quasi-isotropic layup: UTS ~600 MPa, E ~50 GPa. Autoclave-cured prepreg (aerospace) or infusion/RTM (industrial). Used in aerospace primary structures (fuselage, wings), Formula 1 chassis, bicycle frames, wind turbine blades, pressure vessels (Type IV) and high-end sporting goods. Fiber types: T300, T700, T800, M40J, M55J.
POM-H (Acetal Homopolymer)
Polyoxymethylene Homopolymer — slightly stronger and stiffer than POM-C copolymer but with centerline porosity in stock shapes and lower resistance to hot water/alkalis. Trade names include Delrin (DuPont/DuPont de Nemours) and Tenac (Asahi Kasei). Used for gears, cams, springs, clips, fuel system components, and precision-machined parts where maximum stiffness is needed.
| Epoxy/Carbon Fiber (CFRP) | POM-H (Acetal Homopolymer) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ASTM D3039 | ISO 10350 |
Mechanical properties
| Property | Epoxy/Carbon Fiber (CFRP) | POM-H (Acetal Homopolymer) | Unit |
|---|---|---|---|
| Tensile Strength | 1500–2000 | — | MPa |
| Tensile Modulus | 120–150 | — | GPa |
| Density | 1.5–1.6 | — | g/cm³ |
Compatibility Assessment
Epoxy/Carbon Fiber (CFRP) and POM-H (Acetal Homopolymer) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is Epoxy/Carbon Fiber (CFRP) the same as POM-H (Acetal Homopolymer)?
Epoxy/Carbon Fiber (CFRP) and POM-H (Acetal Homopolymer) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace Epoxy/Carbon Fiber (CFRP) with POM-H (Acetal Homopolymer)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between Epoxy/Carbon Fiber (CFRP) and POM-H (Acetal Homopolymer)?
The main differences are in the following elements: overall alloying content. Epoxy/Carbon Fiber (CFRP) is a Polymers grade, while POM-H (Acetal Homopolymer) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.