FKM (Fluoroelastomer / Viton) vs PPS GF40: 0% composition overlap. Significantly different materials serving different application areas.
FKM (Fluoroelastomer / Viton) vs PPS GF40
Side-by-side chemical composition and mechanical property comparison.
Overview
FKM (Fluoroelastomer / Viton)
Fluoroelastomer — THE high-temperature and chemical-resistant rubber. Outstanding resistance to oils, fuels, acids, and solvents at temperatures up to 200°C (short-term 230°C). Fluorine content (64-70%) determines chemical resistance. Trade names: Viton (Chemours), Tecnoflon (Solvay), Dai-El (Daikin). 5-10x more expensive than NBR. Used for aerospace fuel seals, chemical process seals, automotive fuel injector O-rings, semiconductor processing, and any seal exposed to aggressive chemicals at high temperature.
PPS GF40
Polyphenylene Sulfide with 40% glass fiber — the ultimate under-hood engineering plastic. Service to 240°C continuous, inherently V-0 flame resistant without additives, near-zero moisture absorption (<0.02%), exceptional chemical resistance (comparable to PEEK/fluoropolymers). Trade names include Ryton R-4 (Solvay), Fortron 1140L4 (Celanese), Tedur (INEOS), TECATRON GF40 (Ensinger). Used for automotive water pump impellers, thermostat housings, EGR valves, LED reflectors, and semiconductor wafer carriers.
| FKM (Fluoroelastomer / Viton) | PPS GF40 | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 37 | ISO 10350 |
Mechanical properties
| Property | FKM (Fluoroelastomer / Viton) | PPS GF40 | Unit |
|---|---|---|---|
| tensile_strength | 8–17 | 150–185 | MPa |
| elongation | 150–350 | 1–2 | % |
| hardness_shore_a | 60–90 | — | Shore A |
Compatibility Assessment
FKM (Fluoroelastomer / Viton) and PPS GF40 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is FKM (Fluoroelastomer / Viton) the same as PPS GF40?
FKM (Fluoroelastomer / Viton) and PPS GF40 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace FKM (Fluoroelastomer / Viton) with PPS GF40?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between FKM (Fluoroelastomer / Viton) and PPS GF40?
The main differences are in the following elements: overall alloying content. FKM (Fluoroelastomer / Viton) is a Polymers grade, while PPS GF40 is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.