FR-4 (Glass Epoxy Laminate) vs POM-H (Acetal Homopolymer): 0% composition overlap. Significantly different materials serving different application areas.
FR-4 (Glass Epoxy Laminate) vs POM-H (Acetal Homopolymer)
Side-by-side chemical composition and mechanical property comparison.
Overview
FR-4 (Glass Epoxy Laminate)
Flame retardant woven fiberglass cloth with epoxy resin binder — the worldwide standard substrate material for printed circuit boards (PCBs). Designated NEMA grade FR-4 and IPC-4101. Good mechanical strength, dimensional stability and electrical insulation up to 130°C (Tg). Dielectric constant 4.2–4.7 at 1 MHz. Self-extinguishing (UL94 V-0). Used for single/multilayer PCBs, electrical insulation boards, structural composites in electronics, test fixtures and jigs. Available in thicknesses 0.1–50 mm.
POM-H (Acetal Homopolymer)
Polyoxymethylene Homopolymer — slightly stronger and stiffer than POM-C copolymer but with centerline porosity in stock shapes and lower resistance to hot water/alkalis. Trade names include Delrin (DuPont/DuPont de Nemours) and Tenac (Asahi Kasei). Used for gears, cams, springs, clips, fuel system components, and precision-machined parts where maximum stiffness is needed.
| FR-4 (Glass Epoxy Laminate) | POM-H (Acetal Homopolymer) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | IPC-4101 | ISO 10350 |
Mechanical properties
| Property | FR-4 (Glass Epoxy Laminate) | POM-H (Acetal Homopolymer) | Unit |
|---|---|---|---|
| Flexural Strength | 380–480 | — | MPa |
| Tensile Strength | 280–340 | — | MPa |
| Compressive Strength | 350–420 | — | MPa |
Compatibility Assessment
FR-4 (Glass Epoxy Laminate) and POM-H (Acetal Homopolymer) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is FR-4 (Glass Epoxy Laminate) the same as POM-H (Acetal Homopolymer)?
FR-4 (Glass Epoxy Laminate) and POM-H (Acetal Homopolymer) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace FR-4 (Glass Epoxy Laminate) with POM-H (Acetal Homopolymer)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between FR-4 (Glass Epoxy Laminate) and POM-H (Acetal Homopolymer)?
The main differences are in the following elements: overall alloying content. FR-4 (Glass Epoxy Laminate) is a Polymers grade, while POM-H (Acetal Homopolymer) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.