LCP (Liquid Crystal Polymer) vs PBT GF30: 0% composition overlap. Significantly different materials serving different application areas.
LCP (Liquid Crystal Polymer) vs PBT GF30
Side-by-side chemical composition and mechanical property comparison.
Overview
LCP (Liquid Crystal Polymer)
Liquid Crystal Polymer — self-reinforcing aromatic polyester with outstanding flow into thin walls (<0.2mm). Extremely low moisture absorption (0.02%), minimal warpage, excellent dimensional stability. Near-zero creep. Inherently flame-retardant (V-0 at 0.2mm). Very high HDT (>270°C). Trade names: Vectra (Celanese), Zenite (DuPont), Siveras (Toray). THE micro-connector and SMT-reflow-compatible polymer. Used for SMD connectors, fiber optic ferrules, chip carriers, sensors, and ultra-thin-wall electronic housings.
PBT GF30
Polybutylene Terephthalate with 30% glass fiber — THE connector and electrical component material. Key advantage over PA6 GF30: near-zero moisture absorption (0.02-0.2%), so mechanical and electrical properties are stable regardless of humidity. Lower UTS than PA6 GF30 but consistent. Trade names include Ultradur B4300 G6 (BASF), Valox 420 (SABIC), Celanex (Celanese), Crastin (DuPont). Used for electrical connectors, relay housings, coil formers, automotive sensors, and any part requiring dimensional stability in humid environments.
| LCP (Liquid Crystal Polymer) | PBT GF30 | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 527-1 | ISO 10350 |
Mechanical properties
| Property | LCP (Liquid Crystal Polymer) | PBT GF30 | Unit |
|---|---|---|---|
| tensile_strength | 130–190 | 145–165 | MPa |
| elongation | 2–4 | 2–3 | % |
| e_modulus | 9000–17000 | 9.5–11 | MPa |
Compatibility Assessment
LCP (Liquid Crystal Polymer) and PBT GF30 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is LCP (Liquid Crystal Polymer) the same as PBT GF30?
LCP (Liquid Crystal Polymer) and PBT GF30 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace LCP (Liquid Crystal Polymer) with PBT GF30?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between LCP (Liquid Crystal Polymer) and PBT GF30?
The main differences are in the following elements: overall alloying content. LCP (Liquid Crystal Polymer) is a Polymers grade, while PBT GF30 is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.