NBR (Nitrile Rubber) vs PA66 GF30: 0% composition overlap. Significantly different materials serving different application areas.
NBR (Nitrile Rubber) vs PA66 GF30
Side-by-side chemical composition and mechanical property comparison.
Overview
NBR (Nitrile Rubber)
Nitrile butadiene rubber (Buna-N) — THE oil and fuel resistant elastomer. ACN content (18-50%) determines the oil resistance vs low-temp flexibility tradeoff. Higher ACN = better oil resistance but stiffer at low temp. The most widely used seal material worldwide. Used for O-rings, fuel hoses, gaskets, hydraulic seals, oil seals, and nitrile gloves. Not suitable for ozone, UV, or polar solvents (ketones, esters). HNBR variant for higher heat resistance.
PA66 GF30
Polyamide 66 with 30% short glass fiber — stronger and more heat-resistant than PA6 GF30 due to higher-Tm base polymer. UTS ~190 MPa dry, HDT ~250°C. THE automotive under-hood material for structural brackets. Trade names include Ultramid A3WG6 (BASF), Zytel 70G30 (DuPont), Durethan AKV 30 (LANXESS), Technyl A218 V30 (Domo). Used for engine brackets, radiator end tanks, air intake manifolds, and electrical connectors.
| NBR (Nitrile Rubber) | PA66 GF30 | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 37 | ISO 10350 |
Chemical composition (wt%) — Pro
| Element | NBR (Nitrile Rubber) | PA66 GF30 | Overlap |
|---|---|---|---|
| Butadiene | 50–82% | — | — |
| Acrylonitrile (ACN) | 18–50% | — | — |
| Polyamide 66 (Base Polymer) | — | 68–72% | — |
| Glass Fiber Reinforcement | — | 28–32% | — |
Mechanical properties — Pro
| Property | NBR (Nitrile Rubber) | PA66 GF30 | Unit |
|---|---|---|---|
| Tensile Strength | 7–24 | 185–200 | MPa |
| Elongation | 200–600 | 3–4 | % |
| hardness_shore_a | 40–90 | — | Shore A |
| Density | |||
| continuous_service_temp | |||
| Elastic Modulus | |||
| hdt_1_8mpa | |||
| Melting Point | |||
| Tensile Strength | |||
| Tensile Modulus | |||
| Elongation at Break | |||
| Charpy Impact (notched) | |||
| Density | |||
| Melting Point | |||
| HDT/A (1.8 MPa) | |||
| Water Absorption (24h) | |||
| Glass Fiber Content |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeCompatibility Assessment
NBR (Nitrile Rubber) and PA66 GF30 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is NBR (Nitrile Rubber) the same as PA66 GF30?
NBR (Nitrile Rubber) and PA66 GF30 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace NBR (Nitrile Rubber) with PA66 GF30?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between NBR (Nitrile Rubber) and PA66 GF30?
The main differences are in the following elements: overall alloying content. NBR (Nitrile Rubber) is a Polymers grade, while PA66 GF30 is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.