P355NH vs P355NL2: 95% composition overlap. Very similar materials, likely interchangeable for most applications.
P355NH vs P355NL2
Side-by-side chemical composition and mechanical property comparison.
Overview
P355NH
1.0565
Weldable fine-grained non-alloy steel for pressure vessels with minimum yield strength 355 MPa. NH designation indicates normalized condition with specified elevated temperature properties and impact testing at -20°C. Very widely used pressure vessel grade for boilers, storage tanks, heat exchangers, and pipes transporting hot liquids and pressurized gases. Good weldability and resistance to brittle cracking.
P355NL2
1.1106
Weldable fine-grained non-alloy steel for pressure vessels with minimum yield strength 355 MPa and impact testing at -50°C (NL2 designation). The most stringent low-temperature variant of the P355 series with tightest P and S control. Used for cryogenic storage vessels, LNG tanks, and pressure equipment in extreme cold service. Commonly stocked by European plate distributors.
| P355NH | P355NL2 | |
|---|---|---|
| Material Number | 1.0565 | 1.1106 |
| Category | Carbon Steel | Carbon Steel |
| Standard | EN 10028-3 | EN 10028-3 |
Chemical composition (wt%)
| Element | P355NH | P355NL2 | Overlap |
|---|---|---|---|
| C | ≤ 0.18% | ≤ 0.18% | OK |
| Si | ≤ 0.5% | ≤ 0.5% | OK |
| Mn | 1.1–1.7% | 1.1–1.7% | OK |
| P | ≤ 0.025% | ≤ 0.02% | OK |
Mechanical properties
| Property | P355NH | P355NL2 | Unit |
|---|---|---|---|
| tensile_strength | 490–630 | 490–630 | MPa |
| yield_strength | ≥ 355 | ≥ 355 | MPa |
| elongation | ≥ 22 | ≥ 22 | % |
Compatibility Assessment
P355NH and P355NL2 have very similar compositions (95% overlap) and are likely interchangeable for most applications. Verify mechanical properties for your specific use case.
Automated assessment based on composition analysis
Frequently Asked Questions
Is P355NH the same as P355NL2?
P355NH and P355NL2 have a 95% composition overlap. For most purposes, they can be considered similar.
Can I replace P355NH with P355NL2?
In many cases, yes. The compositions overlap significantly (95%). However, always verify mechanical property requirements and heat treatment compatibility for your specific application.
What is the difference between P355NH and P355NL2?
The main differences are in the following elements: overall alloying content. P355NH is a Carbon Steel grade, while P355NL2 is a Carbon Steel grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.