PA12 (Nylon 12) vs POM-C (Acetal Copolymer): 0% composition overlap. Significantly different materials serving different application areas.
PA12 (Nylon 12) vs POM-C (Acetal Copolymer)
Side-by-side chemical composition and mechanical property comparison.
Overview
PA12 (Nylon 12)
Polyamide 12 — the long-chain polyamide with the lowest moisture absorption of all PA grades (0.1-0.15% vs PA6: 1.5%). Excellent dimensional stability in humid environments. Best chemical resistance among polyamides (oils, fuels, hydraulic fluids). Lowest density of all PA (1.01 g/cm³). Also the dominant 3D printing (SLS/MJF) material. Trade names include Rilsamid (Arkema), Grilamid L (EMS), TECAMID 12 (Ensinger), Vestamid L (Evonik). Used for fuel lines, brake lines, pneumatic tubing, cable sheathing, and 3D-printed functional parts.
POM-C (Acetal Copolymer)
Polyoxymethylene Copolymer — the precision engineering plastic. Exceptional dimensional stability, low moisture absorption (0.2%), low friction coefficient, and excellent machinability. More hydrolysis-resistant and chemically stable than POM-H (homopolymer). No centerline porosity in stock shapes. Trade names include Hostaform (Celanese), Ertacetal C (MCAM), Duracon (Polyplastics). Used for gears, bearings, valve bodies, pump parts, electrical insulators, and food/medical contact parts.
| PA12 (Nylon 12) | POM-C (Acetal Copolymer) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 10350 | ISO 10350 |
Mechanical properties
| Property | PA12 (Nylon 12) | POM-C (Acetal Copolymer) | Unit |
|---|---|---|---|
| tensile_strength | 45–60 | 60–67 | MPa |
| yield_strength | 40–50 | 58–62 | MPa |
| elongation | 100–300 | 25–45 | % |
Compatibility Assessment
PA12 (Nylon 12) and POM-C (Acetal Copolymer) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is PA12 (Nylon 12) the same as POM-C (Acetal Copolymer)?
PA12 (Nylon 12) and POM-C (Acetal Copolymer) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace PA12 (Nylon 12) with POM-C (Acetal Copolymer)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between PA12 (Nylon 12) and POM-C (Acetal Copolymer)?
The main differences are in the following elements: overall alloying content. PA12 (Nylon 12) is a Polymers grade, while POM-C (Acetal Copolymer) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.