PA12 (Nylon 12) vs PP GF30: 0% composition overlap. Significantly different materials serving different application areas.
PA12 (Nylon 12) vs PP GF30
Side-by-side chemical composition and mechanical property comparison.
Overview
PA12 (Nylon 12)
Polyamide 12 — the long-chain polyamide with the lowest moisture absorption of all PA grades (0.1-0.15% vs PA6: 1.5%). Excellent dimensional stability in humid environments. Best chemical resistance among polyamides (oils, fuels, hydraulic fluids). Lowest density of all PA (1.01 g/cm³). Also the dominant 3D printing (SLS/MJF) material. Trade names include Rilsamid (Arkema), Grilamid L (EMS), TECAMID 12 (Ensinger), Vestamid L (Evonik). Used for fuel lines, brake lines, pneumatic tubing, cable sheathing, and 3D-printed functional parts.
PP GF30
Polypropylene with 30% short glass fiber — a cost-effective alternative to PA GF30 for applications up to ~130°C. Much cheaper base resin (PP vs PA), zero moisture sensitivity, and excellent chemical resistance. Lower strength than PA6 GF30 (UTS 80 vs 175 MPa) but sufficient for many structural parts. Trade names include Celstran PP-GF30 (Celanese), Tepex (LANXESS), Stamax (SABIC). Used for automotive front-end carriers, battery trays, HVAC components, and household appliance frames.
| PA12 (Nylon 12) | PP GF30 | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 10350 | ISO 10350 |
Mechanical properties
| Property | PA12 (Nylon 12) | PP GF30 | Unit |
|---|---|---|---|
| tensile_strength | 45–60 | 70–90 | MPa |
| yield_strength | 40–50 | — | MPa |
| elongation | 100–300 | 3–5 | % |
Compatibility Assessment
PA12 (Nylon 12) and PP GF30 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is PA12 (Nylon 12) the same as PP GF30?
PA12 (Nylon 12) and PP GF30 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace PA12 (Nylon 12) with PP GF30?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between PA12 (Nylon 12) and PP GF30?
The main differences are in the following elements: overall alloying content. PA12 (Nylon 12) is a Polymers grade, while PP GF30 is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.