CuSn6
CW452KPhosphor bronze with 6% tin — better cold formability than CuSn8 at slightly lower strength. Excellent spring properties and fatigue resistance. Used for electrical connectors, spring contacts, switch parts, bellows, bourdon tubes, and precision springs.
International equivalents
| Flag | Standard | Country | Grade | Number | Match |
|---|---|---|---|---|---|
| 🇺🇸 | UNS | USA | UNS C51900 | C51900 | REF |
| 🇪🇺 | EN | Europe | CuSn6 | CW452K | 100% |
Sources: ASTM B103, EN 1652
Chemical composition comparison (wt%)
Side-by-side: CuSn6 (EN) (EN 1652) vs CuSn6 (EN) (EN 1652)
| Element | CuSn6 (EN) | CuSn6 (EN) | Overlap |
|---|---|---|---|
| P | 0.01–0.4% | 0.01–0.4% | OK |
| Ni | 0–0.3% | 0–0.3% | OK |
| Cu | — | — | — |
| Sn | 5.5–7% | 5.5–7% | OK |
| Zn | 0–0.3% | 0–0.3% | OK |
| Pb | 0–0.02% | 0–0.02% | OK |
| Fe | 0–0.1% | 0–0.1% | OK |
Mechanical properties
R420
| Property | Value | Unit |
|---|---|---|
| Tensile Strength | 420–520 | MPa |
| Yield Strength | ≥ 280 | MPa |
| Elongation | ≥ 18 | % |
| Elastic Modulus | ≥ 110 | GPa |
| Density | ≥ 8.8 | g/cm3 |
Related materials
CuZn37
2.0321Lead-free alpha/alpha+beta brass (63% Cu, 37% Zn). Compromise between cold formability (CuZn35) and hot formability (CuZn40). The most widely used unleaded brass. Used for cartridge cases, radiator cores, lamp components, plumbing fixtures, and decorative hardware.
CuZn36Pb3
CW603NFree-cutting leaded brass — the benchmark for non-ferrous machinability (rated 100%). Lead particles act as chip breakers for excellent surface finish. Used for screw machine parts, fittings, valves, watch components, precision mechanics, and electrical connectors. Old DIN number 2.0375.
CuAl9Ni3Fe2
CC331GStandard aluminum bronze casting alloy — 9% Al, lower Ni (3%) and Fe (2%) than CuAl10Ni5Fe4 (NAB). Good strength and corrosion resistance at lower cost than NAB. Used for valve bodies, pump casings, bearing bushings, and marine fittings where NAB-level performance is not required. UNS C95400 equivalent.
Not sure which material fits?
🤖 Ask AI Advisor →All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.