PA6-GF15
Polyamide 6 with 15% short glass fiber reinforcement — moderate stiffness increase (E-Mod ~5.5 GPa vs 2.7 unfilled) while retaining good impact strength and elongation. Better toughness than higher-filled grades (GF30, GF50). Trade names: Ultramid B3EG3 (BASF), Zytel 73G15 (DuPont). Used for structural clips, housings, brackets, and under-hood automotive parts where moderate stiffness with good impact is needed.
Mechanical properties
Related materials
PA66 (Nylon 66)
Polyamide 66 — stiffer and more heat-resistant than PA6. Higher crystallinity gives better creep resistance and ~40°C higher melting point (260°C vs 220°C). Slightly more brittle. More moisture-sensitive at saturation than PA6. Trade names include Ultramid A (BASF), Zytel 101 (DuPont), Tecamid 66 (Ensinger). Dominant in US/UK markets. Used for automotive engine components, electrical connectors, gears, cable ties, and industrial bushings.
PC/ABS (Blend)
Polycarbonate + ABS blend — one of the most widely used industrial thermoplastic alloys. Combines PC impact strength and heat resistance with ABS processability and lower cost. Better chemical resistance than pure PC. Properties tunable by PC/ABS ratio. Trade names include Bayblend (Covestro), Cycoloy (SABIC), Pulse (Techpolymers). Used for automotive dashboards, laptop/phone housings, power tool casings, and 3D printing (FDM filament).
PE-UHMW
Ultra-High Molecular Weight Polyethylene — the highest impact-strength thermoplastic. Molecular weight 2-6 million g/mol. Self-lubricating, extremely wear-resistant (15x better than carbon steel), and chemically inert. Used for hip/knee implant bearings, conveyor guides, dock fenders, chute liners, food processing equipment, and ballistic armor (Dyneema/Spectra fiber form).
Export this comparison as PDF
Professional datasheet with equivalents, composition, and properties. Ready for your QM documentation.
Download PDF — €4.90Included with PRO subscription