PC/ABS (Blend)
Polycarbonate + ABS blend — one of the most widely used industrial thermoplastic alloys. Combines PC impact strength and heat resistance with ABS processability and lower cost. Better chemical resistance than pure PC. Properties tunable by PC/ABS ratio. Trade names include Bayblend (Covestro), Cycoloy (SABIC), Pulse (Techpolymers). Used for automotive dashboards, laptop/phone housings, power tool casings, and 3D printing (FDM filament).
International equivalents
| Flag | Standard | Country | Grade | Number | Match |
|---|---|---|---|---|---|
| ISO | INT | PC+ABS | — | REF | |
| 🇩🇪 | TRADE | Germany | Bayblend (Covestro) | — | 95% |
| 🇺🇸 | TRADE | USA | Cycoloy (SABIC) | — | 95% |
Sources: ISO 10350, Covestro TDS, SABIC TDS
Mechanical properties — Pro
Injection Molded
| Property | Value | Unit |
|---|---|---|
| Tensile Strength | ||
| Yield Strength | ||
| Elongation | ||
| Elastic Modulus | ||
| Density | ||
| Glass Transition Temp (Tg) | ||
| Water Absorption (24h) |
Sign up free and get 5 full lookups immediately.
Sign up free — 5 lookups/day freeRelated materials
EPDM (Ethylene Propylene Diene Rubber)
Ethylene propylene diene monomer rubber — THE outdoor/weather elastomer. Saturated backbone gives outstanding ozone, UV, and weathering resistance. Excellent resistance to steam, hot water, and polar solvents. NOT resistant to oils/fuels (opposite of NBR). Good electrical insulation. ρ 0.85-1.3 (lightest common rubber). Used for automotive door/window seals, roofing membranes, radiator hoses, HVAC gaskets, and pond liners.
Epoxy/Carbon Fiber (CFRP)
Carbon fiber reinforced epoxy — the benchmark structural composite material. Unidirectional ply: tensile strength 1500–2000 MPa, modulus 120–150 GPa at density 1.55 g/cm³ (5x stronger than steel at 1/5 the weight). Quasi-isotropic layup: UTS ~600 MPa, E ~50 GPa. Autoclave-cured prepreg (aerospace) or infusion/RTM (industrial). Used in aerospace primary structures (fuselage, wings), Formula 1 chassis, bicycle frames, wind turbine blades, pressure vessels (Type IV) and high-end sporting goods. Fiber types: T300, T700, T800, M40J, M55J.
FKM (Fluoroelastomer / Viton)
Fluoroelastomer — THE high-temperature and chemical-resistant rubber. Outstanding resistance to oils, fuels, acids, and solvents at temperatures up to 200°C (short-term 230°C). Fluorine content (64-70%) determines chemical resistance. Trade names: Viton (Chemours), Tecnoflon (Solvay), Dai-El (Daikin). 5-10x more expensive than NBR. Used for aerospace fuel seals, chemical process seals, automotive fuel injector O-rings, semiconductor processing, and any seal exposed to aggressive chemicals at high temperature.
Not sure which material fits?
🤖 Ask AI Advisor →All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.