EPDM (Ethylene Propylene Diene Rubber) vs PA66 (Nylon 66): 0% composition overlap. Significantly different materials serving different application areas.
EPDM (Ethylene Propylene Diene Rubber) vs PA66 (Nylon 66)
Side-by-side chemical composition and mechanical property comparison.
Overview
EPDM (Ethylene Propylene Diene Rubber)
Ethylene propylene diene monomer rubber — THE outdoor/weather elastomer. Saturated backbone gives outstanding ozone, UV, and weathering resistance. Excellent resistance to steam, hot water, and polar solvents. NOT resistant to oils/fuels (opposite of NBR). Good electrical insulation. ρ 0.85-1.3 (lightest common rubber). Used for automotive door/window seals, roofing membranes, radiator hoses, HVAC gaskets, and pond liners.
PA66 (Nylon 66)
Polyamide 66 — stiffer and more heat-resistant than PA6. Higher crystallinity gives better creep resistance and ~40°C higher melting point (260°C vs 220°C). Slightly more brittle. More moisture-sensitive at saturation than PA6. Trade names include Ultramid A (BASF), Zytel 101 (DuPont), Tecamid 66 (Ensinger). Dominant in US/UK markets. Used for automotive engine components, electrical connectors, gears, cable ties, and industrial bushings.
| EPDM (Ethylene Propylene Diene Rubber) | PA66 (Nylon 66) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 37 | ISO 10350 |
Mechanical properties
| Property | EPDM (Ethylene Propylene Diene Rubber) | PA66 (Nylon 66) | Unit |
|---|---|---|---|
| tensile_strength | 7–21 | 80–90 | MPa |
| elongation | 100–700 | 15–40 | % |
| hardness_shore_a | 30–90 | — | Shore A |
Compatibility Assessment
EPDM (Ethylene Propylene Diene Rubber) and PA66 (Nylon 66) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is EPDM (Ethylene Propylene Diene Rubber) the same as PA66 (Nylon 66)?
EPDM (Ethylene Propylene Diene Rubber) and PA66 (Nylon 66) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace EPDM (Ethylene Propylene Diene Rubber) with PA66 (Nylon 66)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between EPDM (Ethylene Propylene Diene Rubber) and PA66 (Nylon 66)?
The main differences are in the following elements: overall alloying content. EPDM (Ethylene Propylene Diene Rubber) is a Polymers grade, while PA66 (Nylon 66) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.