Epoxy/Carbon Fiber (CFRP) vs PEEK GF30: 0% composition overlap. Significantly different materials serving different application areas.
Epoxy/Carbon Fiber (CFRP) vs PEEK GF30
Side-by-side chemical composition and mechanical property comparison.
Overview
Epoxy/Carbon Fiber (CFRP)
Carbon fiber reinforced epoxy — the benchmark structural composite material. Unidirectional ply: tensile strength 1500–2000 MPa, modulus 120–150 GPa at density 1.55 g/cm³ (5x stronger than steel at 1/5 the weight). Quasi-isotropic layup: UTS ~600 MPa, E ~50 GPa. Autoclave-cured prepreg (aerospace) or infusion/RTM (industrial). Used in aerospace primary structures (fuselage, wings), Formula 1 chassis, bicycle frames, wind turbine blades, pressure vessels (Type IV) and high-end sporting goods. Fiber types: T300, T700, T800, M40J, M55J.
PEEK GF30
PEEK with 30% short glass fiber reinforcement. Dramatically increased stiffness (E-Mod 11 GPa vs 4.1 unfilled) and strength (UTS 160 vs 100 MPa) with reduced elongation and creep. Maintains PEEK's chemical resistance and high-temp capability (continuous 250°C). Trade names: Victrex 450GL30, TECAPEEK GF30 (Ensinger), KetaSpire GF30 (Solvay). Used for structural brackets, pump housings, valve seats, bearing cages, and semiconductor wafer handling where higher stiffness than unfilled PEEK is needed.
| Epoxy/Carbon Fiber (CFRP) | PEEK GF30 | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ASTM D3039 | ISO 527-1 |
Mechanical properties
| Property | Epoxy/Carbon Fiber (CFRP) | PEEK GF30 | Unit |
|---|---|---|---|
| Tensile Strength | 1500–2000 | — | MPa |
| Tensile Modulus | 120–150 | — | GPa |
| Density | 1.5–1.6 | — | g/cm³ |
Compatibility Assessment
Epoxy/Carbon Fiber (CFRP) and PEEK GF30 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is Epoxy/Carbon Fiber (CFRP) the same as PEEK GF30?
Epoxy/Carbon Fiber (CFRP) and PEEK GF30 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace Epoxy/Carbon Fiber (CFRP) with PEEK GF30?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between Epoxy/Carbon Fiber (CFRP) and PEEK GF30?
The main differences are in the following elements: overall alloying content. Epoxy/Carbon Fiber (CFRP) is a Polymers grade, while PEEK GF30 is a Polymers grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.